Auxiliary Control Panel Mounting

The auxiliary control panel can be mounted either on the back of the Acuity® control panel, or onto/in a desk.

To Mount the Aux Panel onto a Control Panel

The auxiliary control panel is designed to mount onto the back of the Acuity® control panels that have the same number of source buttons.

Each auxiliary control panel is designed to match a control panel of a specific size. You can only mount an aux panel of the correct size onto the back of a control panel.

  • AP-AUX2RU24AP-AUX2RU24 — A1S, A2M, A3M
  • AP-AUX2RU32AP-AUX2RU32 — A2X, A3
  • AP-AUX2RU40AP-AUX2RU40 — A4
  1. The auxiliary control panel comes pre-installed with the mounting bracket for the control panel it is intended to be installed on.


  2. Align the auxiliary control panel to the back of the control panel and install the three (3) screws at either end of the mounting bracket.


  3. Cable the auxiliary control panel as outlined on the QuickStart poster that came with your switcher.

To Mount the Aux Panel onto a Desk

The auxiliary control panel can be mounted into a desk or onto a desk using the provided side mounting brackets.

Both brackets mount onto the panel in the same manner.



  1. The auxiliary control panel comes pre-installed with the mounting bracket for mounting on a control panel. Remove this bracket by removing the three (3) screws at either end of the mounting bracket.


  2. Install the side mounting brackets onto both sides of the auxiliary control panel using the six (6) screws provided.


  3. Use the two (2) mounting holes on both mounting brackets to secure the auxiliary control panel to the desk.


  4. Cable the auxiliary control panel as outlined on the QuickStart poster that came with your switcher.