Home
Setup
Setup of channel allocation, video format, video codecs, timecode, audio and video routing, remote communications and more.
Replay Setup
User Setup
To Set the Default Fast Forward and Rewind Speeds
Set the default speed that the fast forward and rewind functions operate at.

Setup
Setup of channel allocation, video format, video codecs, timecode, audio and video routing, remote communications and more.
- Server Configuration
- Replay Setup
  - Control Surface Connection
  - Server Setup for Replay
  - User Setup
    - To Set the Audio Tracks for the Headphones
      Assign an audio track to the left and right speakers on the headphone jack on the Control Surface, and set the volume.
    - To Set the Play List Auto-fill
      Clips will be automatically appended to a Play List with the same name as the clip.
    - To Set the Play List Melt List Number
      Select the default Play List that you want to use as the master melt list.
    - To Set the Pre-roll Time
      Assign a pre-roll time to seek to the in point in a clip.
    - To Set the Auto Jog Feature
      Have the rotary dial automatically set to JOG when turned if it is not assigned to another function.
    - To Set the Default Fast Forward and Rewind Speeds
      Set the default speed that the fast forward and rewind functions operate at.
    - To Set the Max Jog Speed
      Set the maximum speed video will move when using the rotary dial in JOG mode.
    - To Set the Max Fast Jog Speed
      Set the maximum speed video will move when using the rotary dial in FAST JOG mode.
    - To Set the Max Cruise Speed
      Set the maximum speed video will move when using the rotary dial in CRUISE mode.
    - To Set the Max Fast Cruise Speed
      Set the maximum speed video will move when using the rotary dial in FAST CRUISE mode.
    - To Set the Max T-Bar Speed (VAR 2)
      Set the maximum speed video will move when the T-bar is in the maximum speed position (top) and the VAR 2 mode is active.
    - To Set the Min T-Bar Speed (VAR 2)
      Set the minimum speed video will move when the T-bar is in the minimum speed position (bottom) and the VAR 2 mode is active.
    - To Set the Max T-Bar Speed (VAR 3)
      Set the maximum speed video will move when the T-bar is in the maximum speed position (top) and the VAR 3 mode is active.
    - To Set the Min T-Bar Speed (VAR 3)
      Set the minimum speed video will move when the T-bar is in the minimum speed position (bottom) and the VAR 3 mode is active.
    - To Set the Auto-mark In-point Offset
      Set the timecode that is subtracted from the point of interest (POI) timecode when saving a clip that has no in-point.
    - To Set the Auto-mark Out-point Offset
      Set the timecode that is added to the point of interest (POI) timecode when saving a clip that have no out-point.
    - To Set the Action of Camera Softkeys in CP Mode
      Set what happens when a camera softkey is press when CLIP PLAY (CP) playback mode is active.
    - To Set the Transition Type for Two Replay Channels
      Select the type of transition that is applied when you press TAKE in Playlist mode (PL)) and have two replay channels. The transition occurs between the two channels.
    - To Set the Duration of a Mix Transition
      Set the duration of the mix transition between the two replay channels.
    - To Set Whether Gang Mode is Selected for Live EE Record
      Set whether GANG is automatically selected for Output Control when the LIVE EE record button is pressed.
    - To Set Whether Gang Mode is Deselected if a Playout Channel is Selected
      Set whether GANG is automatically deselected for Output Control when any of the playout channels (P1,P2,P3,P4) are selected.
    - To Set Whether Preferred Camera Angles are Used for Live EE Record
      Set whether the preferred camera angle for each playout channel is selected when is pressed.
    - To Set the Preferred Camera Angles
      Set the preferred camera angle for each playout channel.
    - To Set the Preferred Play List
      Set the preferred Play List for each playout channel when a Replay Event is launched.
    - To Set Whether a Clip is Automatically Loaded in CP Mode
      Set whether a new clip is automatically loaded when the selection highlight is moved to the next clip when CLIP PLAY mode is active. When this setting is OFF you must select the clip and press LOAD to manually load the clip.
    - To Set Whether the Out-point of a Clip is Used in CP Mode
      Set whether a clip stops playing when it reaches the out-point in CLIP PLAY mode. When this setting is OFF the clip will continue to play through the out-point.
    - To Set Whether Play List uses PGM/PVW
      Set whether a Play List will always play out of two channels (PGM/PVW) when on-air in PLAY LIST mode. When this setting is OFF you can choose to play out on two channels (PGM/PVW) or a single channel.
    - To Set Whether a Mark Point is Saved to the Clip Register
      Set whether a mark point is added to the Play List and saved in the Clip Register when APPEND is pressed. When this setting is OFF the mark point is added to the Play List but not saved to the Clip Register.
    - To Set the Amount Inactive Lists are Dimmed
      Set the amount the Clip Register or Play List are dimmed when not active. This helps to quickly focus on the list that is currently active.
    - To Set Control Surface Brightness
      Set the brightness of the buttons and LEDs on the Control Surface.
    - To Set Control Surface Contrast
      Set the contrast of the buttons on the Control Surface.
    - To Set Playout Channel Color
      Set the color that is applied to the border of each playout channel and the corresponding OUTPUT CONTROL button on the Control Surface.
    - To Set the Saturation of the Playout Channel Borders
      Set the amount of saturation applied to the borders of the playout channels.
    - To Set the Source of the Name that is Applied to New Clips
      Set the source of the name that is applied to all camera angles when SAVE is pressed.
    - To Set the Primary and Alternate Camera Windows
      Set the number of camera angles that are visible at a time in the windows. Camera angles that are not visible in the primary set of windows are shown in the alternate set of windows.
    - To Set the Appearance of the Audio Meters
      Set the position and opacity of the audio meters on each output.
  - User Setup Files
  - To Name a Camera Input
    Set the name that appears on the menus for the camera input.
- Remote Control Support
  Use the information in this section to assist you in setting up an external device to control your server.
- Maintenance
  Refer to the following information for performing maintenance on your server, muting an alarm, restoring factory defaults, or upgrading the software.
- AsRun Log Creator
  The server keeps a log of stills and clips that have been played in their entirety on all channel of the server. This information can then be filtered and output into either a CSV file or a PDF report.
- Troubleshooting

To Set the Default Fast Forward and Rewind Speeds

Set the default speed that the fast forward and rewind functions operate at.

Press MARK + SCROLL to open the User Setup menu.
Use the up and down arrows, or the rotary dial, to select FFWD/REWIND Speed.
Use the keyboard to enter the multiplier you want to use (1X is real-time).
Press MARK + SCROLL again to close the menu.