Maintenance Menus

Auto Setup

Click the Maintenance Menu tab and click Auto Setup

Item Settings
Ch1 Auto Phase/Ch2 Auto Phase (see note*)
Gray Scale (auto gray scale setup)
Black Level 0.0% to 12.35% (0.5% steps)
Flare Level 0.0% to 24.70% (0.1% steps)
Gamma Level 42.20% to 67.70% (0.1% steps)
Note: * When you select ChX Auto Phase a marker is shown on the monitor. Move the camera to place the marker over the skin tone you want to detect and press Set. This functionality can also be accessed from the Skin Detail menu.

White Shading

Click the Maintenance Menu tab and click White Shade

Item Settings
Lens File (load lens file) (AC-H200-UCHR only) Lens 1 to Lens 8
Extender OFF, **, x2, x0.8
White Shading (auto white shading)
Red Vertical Saw (AC-Z50-UCHR only) -128 to 127
Green Vertical Saw (AC-Z50-UCHR only) -128 to 127
Blue Vertical Saw (AC-Z50-UCHR only) -128 to 127
Red Horizontal Saw -128 to 127
Green Horizontal Saw -128 to 127
Blue Horizontal Saw -128 to 127
Red Horizontal Para -128 to 127
Green Horizontal Para -128 to 127
Blue Horizontal Para -128 to 127
Red Vertical Saw -128 to 127
Green Vertical Saw -128 to 127
Blue Vertical Saw -128 to 127
Red Vertical Para -128 to 127
Green Vertical Para -128 to 127
Blue Vertical Para -128 to 127

Auto Iris

Click the Maintenance Menu tab and click Auto Iris

Item Settings
Auto Iris Remote, Auto
Iris Control -128 to 127 (not available when using RU unit)
Iris Trim (AC-Z50-UCHR only) -128 to 127
Iris Speed -128 to 127
Peak/Ave (peak and average) (AC-Z50-UCHR only) 0/10, 1/9, 2/8, 3/7, 4/6, 5/5
Iris Gate (auto iris gate shape/size) (AC-Z50-UCHR only) 1 to 6
Open Limit 0 to 127
Close Limit -128 to -1

ALC Setting (AC-H200-UCHR Only)

Click the Maintenance Menu tab and click ALC

Item Settings
Shutter Off, On
Auto Iris Remote, Auto
M Gain Mode Preset, Auto
ALC Trim -128 to 127 (not available when using RU unit)
Iris Speed -128 to 127
Peak/Ave (peak and average) 0/10, 1/9, 2/8, 3/7, 4/6, 5/5
ALC Gate (auto iris gate shape/size) 1 to 6

Shutter

Click the Maintenance Menu tab and click Shutter

Item Settings
Shutter Off, Preset, Variable, AES
Shutter Preset
  • AC-H200-UCHR — 1/60 (50i,50p), 1/100 (59.94i,59.94p,60i, 60p), 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000
  • AC-Z50-UCHR — 1/100 (59.94i), 1/60 (50i) 1/250, 1/500, 1/1000, 1/2000, CCFRM
Shutter Variable
  • AC-H200-UCHR — 59.94i, 59.94p, 60i, 60p — 1.07s(36dB), 0.53s(30dB), 0.27s(24dB), 0.13s(18dB), 0.07s(12dB), 0.03s(6dB), 1/60.15 to 1/9633
  • AC-Z50-UCHR — 59.94i — 1.07s(36dB), 0.53s(30dB), 0.27s(24dB), 0.13s(18dB), 0.07s(12dB), 0.03s(6dB), 1/59.94 to 1/11238
  • AC-H200-UCHR — 50i, 50p — 1.28s(36dB), 0.64s(30dB), 0.32s(24dB), 0.16s(18dB), 0.08s(12dB), 0.04s(6dB), 1/50.17 to 1/11250
  • AC-Z50-UCHR — 50i — 1.28s(36dB), 0.64s(30dB), 0.32s(24dB), 0.16s(18dB), 0.08s(12dB), 0.04s(6dB), 1/50.00 to 1/9375
CCD Mode (AC-Z50-UCHR only) Field

System

Click the Maintenance Menu tab and click; System

Item Settings
Camera ID 1 - 99
Fan Mode Off, Auto, Low, High
GL H Phase (gen-lock horizontal phase)
  • AC-H200-UCHR — -512 to 511
  • AC-Z50-UCHR — -512
PARA MODE OFF, ON
Date Mode DD-MM-YYYY, MM-DD,YYYY, YYYY-MM-DD
Date Display Off, On
Time Display Off, On
Year 2000 to 2099
Month 1 to 12
Day 1 to 31
Hour 0 to 23
Minute 0 to 59
SDI Out Format
  • AC-H200-UCHR — 1080i, 1080p, 720p
  • AC-Z50-UCHR — 1080i, 480i(16:9), 480i(4:3), 576i(16:9), 576i(4:3)
Monitor Out Format
  • AC-H200-UCHR — 1080i, 1080p, 720p
  • AC-Z50-UCHR — 1080i, 480i(16:9), 480i(4:3), 576i(16:9), 576i(4:3)
Scan Rate
  • AC-H200-UCHR — 59.94Hz, 50Hz, 60Hz
  • AC-Z50-UCHR — 59.94Hz, 50Hz
SDI Mode 4:2:2, 0:4:4
Baud Rate 9600bps, 19200bps
Iris Rate Off, On

Others (AC-Z50-UCHR Only)

Press MENU and select MAINTENANCE > OTHERS

Item Settings
HIGH MIX LV 0 to 255
HIGH MIX OFF, ON

Check

Click the Maintenance Menu tab and click Check

Item Settings
Test (test signal) Off, On
Gamma Off, On
Detail Off, On
Masking Off, On
Knee Off, On
Model (camera model)
CPU Version (CPU firmware version)
Checksum (CPU firmware checksum)
Video Version (video FPGA firmware version)
Note: * If you turn Character off, the onscreen menu is turned off. You must press and hold the MENU button to turn the menus back on (this turns Character back to on).

RLAC (Real-time Lens Aberration Correction) (AC-H200-UCHR Only)

Press MENU and select MAINTENANCE > RLAC

Item Settings
RLAC OFF, ON
STATUS DISABLE, ENABLE, READING