To Install a Lens

  1. Disconnect power from the DC IN port at the back of the camera.
  2. Rotate the Lens Lock Lever counter-clockwise to unlock the mount cap.
  3. Align the lens center mark with the indent at the upper part of the lense mark and install the lens.
  4. Rotate the Lens Lock Lever clock-wise to lock the lense onto the camera.
  5. Connect the lense control cable from the lens to the LENS port on the back of the camera.
    Note: A cable clamp is provided at the front of the camera for cable management.

Following the installation of the lens you may need to adjust the lens flange back, white shading, auto iris speed, or iris close limit, depending on the lens you are installing.