To Change the IP Address From the Camera

  1. Press MENU and select MAINTENANCE > LAN SETTING

    The current network setting for the camera are shown on the menu.

  2. Select IP CONF and press the R button.
  3. Select OCTET1, press the R and L button to select the first part of the address.
  4. Repeat these steps for the remaining octets you want to set.
  5. Select SEND and press the R button to store the new value to the temporary buffer.
  6. Return to the LAN SETTING menu.
  7. Select SUBNET CONF and press the R button.
  8. Select OCTET1, press the R and L button to select the first part of the address.
  9. Repeat these steps for the remaining octets you want to set.
  10. Select SEND and press the R button to store the new value to the temporary buffer.
  11. Return to the LAN SETTING menu.
  12. Select GATEWAY CONF and press the R button.
  13. Select OCTET1, press the R and L button to select the first part of the address.
  14. Repeat these steps for the remaining octets you want to set.
  15. Select SEND and press the R button to store the new value to the temporary buffer.
  16. Return to the LAN SETTING menu.
  17. Verify the new temporary network setting that are shown on the CONF line for the IP address, subnet mask, and gateway.
  18. Select SET DATA and press the R button to set the new network values.