Home
Panel Setup
When the TouchDrive panel has been booted in Carbonite mode you can use DashBoard running on the panel to configure network setting and other aspects of the panel setup.
Carbonite Black Network Setup

Panel Setup
When the TouchDrive panel has been booted in Carbonite mode you can use DashBoard running on the panel to configure network setting and other aspects of the panel setup.
- TouchDrive Network Setup
- TouchDrive Multiple Frames Configuration
  You can connect multiple Carbonite frames to the same TouchDrive control panel.
- TouchDrive SideShot-NG Remote Flex Control
- Carbonite Black Network Setup
  - To Connect Carbonite Black to the Frame
- System Real-Time Clock/Date (TouchDrive)
  The panel uses an internal clock to generate the time for logs.
- Touchscreen Configuration
  The touchscreen interface on TouchDrive can be set to show or hide the title bar at the top of the screen as well as change the layout of the onscreen keyboard.
- Alarms (TouchDrive)
- Bus Map

Carbonite Black Network Setup

All control panels come from the factory set with a static IP address (192.168.0.129) but can be set to use DHCP to automatically obtain an IP address.

The Carbonite Black control panel is automatically discovered in DashBoard and appears as CarbonitePanel followed by the MAC address of that particular panel.

Tip:

If you do not know the IP address of the Carbonite Black control panel, you can set DIP switches on the panel to lock the IP address of the panel to 192.168.0.129 and the IP address that it expects the frame at to . The panel must be re-started for the new IP address to be applied. Refer to Carbonite Black DIP Switches for DIP settings.