Robotic Camera
Press Insert Event > More > Robotic Camera.
Command | Description |
---|---|
Cam All Stop | Quickly stop all robotic camera operations. Use this event to stop all motion of a robotic. |
Deselect Cam | Deselect the robotic camera that was last selected. When a camera is selected by the switcher, that camera remains selected until another camera is selected, or the Deselect Cam event is run. |
Disable Camera | Disable control of the selected robotic camera. When a camera is disabled, you cannot control it from the switcher. |
Execute Move | Execute a prepared camera move on a particular camera. Use the Shot knob to select the move you want to execute. The move must be prepared before it can be executed. |
Grab Positioner | Select which camera is assigned to the positioner by cycling through all the cameras selected on preview, one at a time. Each time the custom control is run, the positioner assignment will jump to the next camera that will go on-air with the next transition. |
Prepare Move | Prepare a camera move on a particular camera. Use the Shot knob to select the move you want to prepare. |
Recall Shot | Recall a shot on a particular robotic camera with a specific duration for the recall to be performed. When programming this event, you are recalling a specific camera on a remote port by selecting the BNC, or BNC name. |
Resave Last | Overwrite the last prepared shot or recalled move with the current position of the camera. For a move, only the prepared position is overwritten. You must re-prepare the move before you can execute it. |
Set Show | Load a set of shot recalls for a robotic camera. |