To Set the Min T-Bar Speed (VAR 3)

Set the minimum speed video will move when the T-bar is in the minimum speed position (bottom) and the VAR 3 mode is active.

Note: If the minimum speed is set below 0 (negative), then a 5 degree dead-zone is applied to the mid-point in the T-bar travel.
  1. Press MARK + SCROLL.

    The User Setup menu opens.

  2. Use the up and down arrows, or the rotary dial, to select T-BAR VAR-3 MAX Speed.
  3. Use the keyboard to enter the multiplier you want to use (1X is real-time).
  4. Press MARK + SCROLL again to close the menu.