Home
Configure AirCleaner-2 from DashBoard
Configure the AirCleaner-2 using DashBoard.
Audio Reaction Times
To Configure the Audio Reaction Time from DashBoard
This setting allows the system to compensate for the amount of time it takes for a users to hear a violation and press the AUDIO concealment button. The starting point for the audio concealment is back-timed (set back) by this amount of time to compensate for the reaction time.

Configure AirCleaner-2 from DashBoard
Configure the AirCleaner-2 using DashBoard.
- DashBoard Interface
  Use DashBoard to connect to your AirCleaner-2 remotely for setup and operation.
- Network Configuration
- Video Reference and Operating Format
- Number of Users
- Total PGM Delay
- PGM Out Audio-Video Offset
- User 2 Delay
- Video Reaction Times
- Audio Reaction Times
  - To Configure the Audio Reaction Time from DashBoard
    This setting allows the system to compensate for the amount of time it takes for a users to hear a violation and press the AUDIO concealment button. The starting point for the audio concealment is back-timed (set back) by this amount of time to compensate for the reaction time.
- Show Chassis Bypass Control
  The Chassis Bypass Control allows you to show or hide the Chassis Bypass Slider on the AirCleaner Virtual Control Panel.
- AirCleaner Virtual Control Panel Conceal Button Mode
  The conceal buttons on the AirCleaner Virtual Control Panel can operate in either a click and hold or toggle on/off mode.
- End Concealment
- Video Concealment
  Video concealment applies an effect or substitute source to obscure or replace unwanted video.
- Audio Concealment
  Audio concealment applies an effect or substitute source to obscure or replace unwanted audio.
- Video Connections
- Supported Video Formats
- Audio Connections
- Chassis Name
  Each AirCleaner-2 can be given a unique name that appears on the AirCleaner Virtual Control Panel.
- User Profiles
- Software Options
  AirCleaner-2 comes with all the hardware required for the available options. These options can either be licensed at the time you purchase your system, or purchased and installed later on.
- Software Updates
  The software on the AirCleaner-2 can be updated remotely from DashBoard.
- Maintenance
  Refer to the following information for performing maintenance on your AirCleaner-2 or restoring factory defaults.

To Configure the Audio Reaction Time from DashBoard

This setting allows the system to compensate for the amount of time it takes for a users to hear a violation and press the AUDIO concealment button. The starting point for the audio concealment is back-timed (set back) by this amount of time to compensate for the reaction time.

From the DashBoard tree view for the AirCleaner-2, expand the Abekas node and double-click Config Panel.
Click on the Control Panel tab.
In the USER 1 CONTROL PANEL PREFERENCES area, enter the audio reaction time for User 1.
- AUDIO CONCEAL REACTION TIME — enter the audio reaction time (0 to max), in seconds.
Tip: If your system is configured for two users, repeat this step for User 2.
Click Apply.