Configure AirCleaner-2 from DashBoard
Configure the AirCleaner-2 using DashBoard.
- DashBoard Interface
  Use DashBoard to connect to your AirCleaner-2 remotely for setup and operation.
- Network Configuration
- Video Reference and Operating Format
- Number of Users
- Total PGM Delay
- PGM Out Audio-Video Offset
- User 2 Delay
- Video Reaction Times
- Audio Reaction Times
- Show Chassis Bypass Control
  The Chassis Bypass Control allows you to show or hide the Chassis Bypass Slider on the AirCleaner Virtual Control Panel.
- AirCleaner Virtual Control Panel Conceal Button Mode
  The conceal buttons on the AirCleaner Virtual Control Panel can operate in either a click and hold or toggle on/off mode.
- End Concealment
- Video Concealment
  Video concealment applies an effect or substitute source to obscure or replace unwanted video.
- Audio Concealment
  Audio concealment applies an effect or substitute source to obscure or replace unwanted audio.
- Video Connections
- Supported Video Formats
- Audio Connections
- Chassis Name
  Each AirCleaner-2 can be given a unique name that appears on the AirCleaner Virtual Control Panel.
- User Profiles
- Software Options
  AirCleaner-2 comes with all the hardware required for the available options. These options can either be licensed at the time you purchase your system, or purchased and installed later on.
- Software Updates
  The software on the AirCleaner-2 can be updated remotely from DashBoard.
- Maintenance
  Refer to the following information for performing maintenance on your AirCleaner-2 or restoring factory defaults.

Video Connections

All SDI inputs operate in the same video format that the outputs are set to.

PGM IN — the main video feed, with embedded audio, coming into the system that audio and video delays can be applied to. Audio delays are applied to all 16 channels of associated audio.
PGM OUT — the main "Live to Air" video feed, with embedded audio, coming out of the system that the audio and video delays are applied to.
AUX IN — the safe video feed, with embedded audio, that the system can be configured to switch to when the video concealment button is pressed. The embedded audio from this source can also be used.
TAP OUT — the monitor out used in a Dual-User work-flow. This video feed, with embedded audio, is downstream of the delay window used by the first user and allows the second user to monitor video coming into their own delay window.