To Store a Memory on Acuity® Panels

  1. Press the ME buttons on the Store side of the Global Memory module for the MEs you want to store a memory to.
    • ME X — the ME(s) you want to store the memory to. Press and hold the ME X button for the first ME you want to include and then press the other ME X buttons to add MEs 1-4. Release the other button and press and hold the +4 button and then press the ME X buttons to add MEs 5-8.
    • ALL — store memory to all MEs.
    Tip: Press STORE on an Effect Memory module to only store a memory to the ME that the panel row is assigned to.
  2. Press and hold BANK and press the number (00-99) for the memory bank you want to store the memory to.
    Tip: If a memory has been stored to a register, the corresponding button is lit. The button shows gray if the memory register is empty. For example, if memories have been stored to registers 1 and 5, buttons 1 and 5 are lit and the buttons 0, 2-4, and 6-9 are gray.
  3. Press the number (0-9) for the memory register you want to store the memory to.
    Tip: If the Auto Recall feature is turned Off, you cannot store or recall the Effects Dissolve or Keys Only setting with a memory.
  4. Press ENTER to store the memory. You are prompted to name the memory. This can be done later.