To Apply the Lens Flare 3D DVE Warp

The Lens Flare 3D DVE Warp creates a point light source and a series of lens flares.

  1. Navigate to the DVE menus for the DVE key you want to apply a 3D DVE Warp to and press DVE Menu > Warp.
    Tip: At the top of the menu it states how many 3D DVE Warp resources are being used.
  2. Press Lens Flare.
  3. Press Position and use the Center (X), Center (Y), and Size knobs to adjust the position and size of the light source of the effect.
    • Center (X) — adjust the horizontal position of the center of the effect.
    • Center (Y) — adjust the vertical position of the center of the effect.
    • Size — adjust the size of the effect.
  4. Press Lighting and use the Fade and Brightness knobs to adjust the lighting of the effect.
    • Fade — select Color to apply a washout light to the video.
    • Brightness — adjust the brightness of the light source, flares, and washout light.
  5. Press Placement and use the Auto-Follow, Angle, Distance knobs to adjust the placement of the lens flare effect from the light source.
    • Auto-Follow — select whether the switcher automatically adjusts the distance between the lens flare and the light source (On) or it is adjusted manually (Off).
    • Angle — adjust the angle of the lens flare compared to the center of the screen.
    • Distance — adjust the distance between the lens flare and the light source. Auto-Follow must be off.
  6. Press Color and use the color picker to select the color you want to use for the effect.
  7. Press Flare Options and use the Aspect, Flare Type, and Flares knobs to adjust the appearance of the effect.
    • Aspect — adjust the aspect ratio of the lens flare and light source.
    • Flare Type — select one of the preset lens flare and light source effects.
    • Flares — select the number of flares used in the effect.