Home
Configure AirCleaner-2 from DashBoard
Configure the AirCleaner-2 using DashBoard.
Maintenance
Refer to the following information for performing maintenance on your AirCleaner-2 or restoring factory defaults.
Manual Bypass
The system can be put into bypass mode for maintenance, troubleshooting, or simply to remove the delay from the video/audio path. Enabling Bypass will remove all delays, effectively routing PGM IN video/audio directly to PGM OUT.
To Enable/Disable Manual Bypass from DashBoard
Bypass the delay buffer.

Configure AirCleaner-2 from DashBoard
Configure the AirCleaner-2 using DashBoard.
- DashBoard Interface
  Use DashBoard to connect to your AirCleaner-2 remotely for setup and operation.
- Network Configuration
- Video Reference and Operating Format
- Number of Users
- Total PGM Delay
- PGM Out Audio-Video Offset
- User 2 Delay
- Video Reaction Times
- Audio Reaction Times
- Show Chassis Bypass Control
  The Chassis Bypass Control allows you to show or hide the Chassis Bypass Slider on the AirCleaner Virtual Control Panel.
- AirCleaner Virtual Control Panel Conceal Button Mode
  The conceal buttons on the AirCleaner Virtual Control Panel can operate in either a click and hold or toggle on/off mode.
- End Concealment
- Video Concealment
  Video concealment applies an effect or substitute source to obscure or replace unwanted video.
- Audio Concealment
  Audio concealment applies an effect or substitute source to obscure or replace unwanted audio.
- Video Connections
- Supported Video Formats
- Audio Connections
- Chassis Name
  Each AirCleaner-2 can be given a unique name that appears on the AirCleaner Virtual Control Panel.
- User Profiles
- Software Options
  AirCleaner-2 comes with all the hardware required for the available options. These options can either be licensed at the time you purchase your system, or purchased and installed later on.
- Software Updates
  The software on the AirCleaner-2 can be updated remotely from DashBoard.
- Maintenance
  Refer to the following information for performing maintenance on your AirCleaner-2 or restoring factory defaults.
  - Manual Bypass
    The system can be put into bypass mode for maintenance, troubleshooting, or simply to remove the delay from the video/audio path. Enabling Bypass will remove all delays, effectively routing PGM IN video/audio directly to PGM OUT.
    - To Enable/Disable Manual Bypass from DashBoard
      Bypass the delay buffer.
    - To Configure the Manual Bypass Mode from DashBoard
      The manual bypass button can either trip an internal bypass relay, or put the system in EE mode.
  - Model and Software Version
    The model, software, and firmware versions of your AirCleaner-2 can help you when contacting Ross Technical Support.
  - Factory Reset
    Return all system setting to the factory default.

To Enable/Disable Manual Bypass from DashBoard

Bypass the delay buffer.

Note: The CHASSIS BYPASS SLIDER must be set to SHOW SLIDER to be able to put the chassis into bypass mode from DashBoard. Refer to To Show or Hide the Chassis Bypass Control Slider from DashBoard for more information.

From the DashBoard tree view for the AirCleaner-2, expand the Abekas node and double-click on the Control Panel 1 or Control Panel 2 node, depending on which user you are.
Slide the O to the right (becomes I) to put the chassis into manual bypass mode. While the chassis is in manual bypass mode, the MAIN CHASSIS BYPASS = ON is shown all AirCleaner Virtual Control Panels.
Slide the I back to the left (becomes O) to take the chassis out of manual bypass mode.