Home
Configure AirCleaner-2 from DashBoard
Configure the AirCleaner-2 using DashBoard.
User 2 Delay

Configure AirCleaner-2 from DashBoard
Configure the AirCleaner-2 using DashBoard.
- DashBoard Interface
  Use DashBoard to connect to your AirCleaner-2 remotely for setup and operation.
- Network Configuration
- Video Reference and Operating Format
- Number of Users
- Total PGM Delay
- PGM Out Audio-Video Offset
- User 2 Delay
  - To Configure the User 2 Delay from DashBoard
    This adjusts the delay between the audio/video on the PGM IN feed versus the TAP OUT by selecting how much of the Total Program Delay time is allocated to User 2.
- Video Reaction Times
- Audio Reaction Times
- Show Chassis Bypass Control
  The Chassis Bypass Control allows you to show or hide the Chassis Bypass Slider on the AirCleaner Virtual Control Panel.
- AirCleaner Virtual Control Panel Conceal Button Mode
  The conceal buttons on the AirCleaner Virtual Control Panel can operate in either a click and hold or toggle on/off mode.
- End Concealment
- Video Concealment
  Video concealment applies an effect or substitute source to obscure or replace unwanted video.
- Audio Concealment
  Audio concealment applies an effect or substitute source to obscure or replace unwanted audio.
- Video Connections
- Supported Video Formats
- Audio Connections
- Chassis Name
  Each AirCleaner-2 can be given a unique name that appears on the AirCleaner Virtual Control Panel.
- User Profiles
- Software Options
  AirCleaner-2 comes with all the hardware required for the available options. These options can either be licensed at the time you purchase your system, or purchased and installed later on.
- Software Updates
  The software on the AirCleaner-2 can be updated remotely from DashBoard.
- Maintenance
  Refer to the following information for performing maintenance on your AirCleaner-2 or restoring factory defaults.

User 2 Delay

The User 2 Delay is the amount of the total delay time that is assigned to User 2. This portion of the total delay time is applied for User 2 on the TAP OUT feed.

For example, if Total PGM Delay is set to 8:00 seconds, and the User 2 Delay is set to 3:00 seconds, then the PGM IN feed is delayed by 3:00 seconds before arriving at the TAP OUT for User 2. It then takes an additional 5:00 seconds for the audio/video to arrive at the PGM OUT.