Configure the AirCleaner-2 using DashBoard.
Refer to the following information for performing maintenance on your AirCleaner-2 or restoring factory defaults.
Return all system setting to the factory default.
Use DashBoard to connect to your AirCleaner-2 remotely for setup and operation.
The Chassis Bypass Control allows you to show or hide the Chassis Bypass Slider on the AirCleaner Virtual Control Panel.
The conceal buttons on the AirCleaner Virtual Control Panel can operate in either a click and hold or toggle on/off mode.
Video concealment applies an effect or substitute source to obscure or replace unwanted video.
Audio concealment applies an effect or substitute source to obscure or replace unwanted audio.
Each AirCleaner-2 can be given a unique name that appears on the AirCleaner Virtual Control Panel.
AirCleaner-2 comes with all the hardware required for the available options. These options can either be licensed at the time you purchase your system, or purchased and installed later on.
The software on the AirCleaner-2 can be updated remotely from DashBoard.
The system can be put into bypass mode for maintenance, troubleshooting, or simply to remove the delay from the video/audio path. Enabling Bypass will remove all delays, effectively routing PGM IN video/audio directly to PGM OUT.
The model, software, and firmware versions of your AirCleaner-2 can help you when contacting Ross Technical Support.
Return all configurations to the factory default settings.
