Mix/DSK

The Mix/DSK option provides an additional half ME that supports up to 4 Auto Select or Self keys and can perform basic dissolves and cuts. Only a single Mix/DSK can be added to a switcher and the video outputs of the Mix/DSK cannot be re-entered back into the switcher.

Note: The Half ME option is not supported on the Evertz® IP Output board or when the switcher is operating in a UHDTV1 video format.

The number of keys depends on how the Mix/DSK option is set up. If Mix/DSK is set to Mix2K there are 2 keys and if it is set to Mix4K there are 4 keys. Both of these options lock specific output BNCs to the video signals being output by the Mix/DSK option.

Note: The Mix/DSK option is applied to the highest number ME in the switcher.
Figure 1. Mix2K


Table 1. Mix2K Output BNC Assignment
Output 4RU Frame 8RU Frame
Program C01, C02 K01, K02
Preview C03, C04 K03, K04
Clean (before key 1) C05 K05
Clean (before key 2) C06 K06
Figure 2. Mix4K


Table 2. Mix4K Output BNC Assignment
Output 4RU Frame 8RU Frame
Program C01, C02 K01, K02
Preview C03, C04 K03, K04
Clean (before key 1) C05 K05
Clean (before key 2) C06 K06
Clean (before key 3) C07 K07
Clean (before key 4) C08 K08
Program C09, C10 K09, K10