Home
Setup
Network connection, video reference, video input and output setup, switcher personality settings, device control and GPIs, aux panels, color correction, and MultiPanel.
Network Setup

Setup
Network connection, video reference, video input and output setup, switcher personality settings, device control and GPIs, aux panels, color correction, and MultiPanel.
- Network Setup
  - Frame Network Setup
    From the frame web interface, you can set up the IP Address of the frame, as well as selecting the IP addresses of all the control panels, and SoftPanel, that can access the frame.
  - Control Panel Network Setup
  - Default Network Settings
  - Network Security
  - System Time
- Video Reference
- Video Input Setup
- Video Output Setup
- Personality
- GPI Control
- Live Edit Decision Lists
- MultiPanel
- Color Schemes
- Device Control
- Auxiliary Control Panels
- Panel Modules
- Acuity Rack Panel
- Color Correction
- High Dynamic Range (HDR) and Wide Color Gamut (WCG) Conversion
- SmartConversion

Network Setup

If the frame is using the default network settings, the control panel will automatically detect the frame on power up. No network setup is required. Once connected, you can change the network settings of each control panel. You must restart the switcher each time you want to apply different network settings.

You can connect up to nine control panels to a single frame. In either a single panel or MultiPanel configuration, you must configure a master panel. Once the master panel is configured, up to eight satellite panels can be configured.