Transition Module

This module is used to perform transitions on an ME. Transitions can be between any combination of keyers and background on the ME.

Table 1. Transition Module Button Functions
Button Function
BKGD Allows you to include the background in the next transition.
KEY X Allows you to include a key with the next transition.
PGM A Allows you to assign the Transition module and buses on that row to Program A of the configurable program output.
PGM B Allows you to assign the Transition module and buses on that row to Program B of the configurable program output.
PST BKGD Allows you to insert a transition to black as the next transition without losing what is currently selected as the next transition.
KEY PRIOR Allows you to change the priority of the keyers on the ME.
TRANS LIMIT Allows you to set the point where a transition will stop. This allows you to have a transition proceed only half way and stop. The next transition is performed from that stop point, back to the original starting point.
DISS Allows you to select a dissolve as the next transition type.
WIPE Allows you to select a wipe as the next transition type.
DVE Allows you to select a DVE wipe as the next transition type.
SEQ Allows you to use the transition module to run a sequence.
MEDIA Is not used at this time.
ROLL CLIP Allows you to tie the playout of a clip to the next transition, or have the clip play immediately. Roll clip only works with external devices that are being controlled by the switcher. The Roll Clip Mode personality options sets the behaviour of this button.