| Add Header |
Select whether to include header data when communicating to a TCP device (Header) or not include the data for a serial device (No
Header). If you are using a DeviceMaster® to communicate with a serial device |
| Brightness |
Select the brightness value (0 to 3) that is sent to the UMD device. |
| Clear Spaces |
Remove all leading and trailing spaces on the labels. |
| Invert |
Selects how tallies are displays and shows the active state of the keyer.
- Standard — tallies are displays with preview on the left and program on the right.
- Inverted — tallies are displays with preview on the right and program on the left.
- Bus Messages — tallies are displayed on the right only and the left tally bits are used to show the active state of the keyer.
- Bus Messages Inv — tallies are displayed on the left only and the right tally bits are used to show the active state of the keyer.
|
| Justify |
Select how the mnemonic names are justified on the output (Left, Right, or Center). |
| MV Names |
Select whether the switcher shows the mnemonic names from the UMD device on the MultiViewer (ON) or
the internal source names (OFF). The labels for the MultiViewer boxes must be turned on to see the names. |
| Rate |
Select whether the switcher sends 1 (Slow) or 70 (Fast) messages per field to the UMD device. |
| Screen |
Select the address of the screen that you want to send the information to (0 to 65535). |
| Version |
Select the version of the TSL protocol you want to use. |
