Home
Setup
Network connection, video reference, video input and output setup, switcher personality settings, device control and GPIs, aux panels, color correction, and MultiPanel.
Network Setup

Setup
Network connection, video reference, video input and output setup, switcher personality settings, device control and GPIs, aux panels, color correction, and MultiPanel.
- Network Setup
  - Switcher Network Setup
    From the web interface, you can set up the IP Address, as well as selecting the IP addresses of all the control panels, and SoftPanel that can access the switcher.
  - Control Panel Network Setup
  - Default Network Settings
  - Network Security
  - System Time
- Video Reference
- Video Input Setup
- Video Output Setup
- Personality
- GPI Control
- MultiPanel
- Color Schemes
- Device Control
- Auxiliary Control Panels
- Acuity® Panel Modules
- TouchDrive Panel Modules
- Acuity Rack Panel (ARP)
- Color Correction

Network Setup

If the switcher is using the default network settings, the control panel will automatically detect the frame on power up. No network setup is required. Once connected, you can change the network settings of each control panel. You must restart the switcher each time you want to apply different network settings.

You can connect up to nine control panels. In either a single panel or MultiPanel configuration, you must configure a main panel. Once the main panel is configured, up to eight satellite panels can be configured.

Note: Refer to Network Ports for a complete list of network ports used by the frame.