| ABMs |
Set the number of 1RU Audio Breakout Units connected to Graphite. |
| Channel Label |
Select where the switcher gets the names for audio channels.
- Switcher — name stored on the switcher.
- Channel ID — channel ID from the audio mixer.
- User Label — user assigned channel name from the audio mixer.
- Fixed Label — input channel number from the audio mixer.
- InheritedLabel — source signal name from the audio mixer.
|
| Converter |
Select the MIDI to Serial converter that you are using to connect to the audio mixer.
- MIDIator — MIDIator™ Systems MS-124W
- SMC — GearLite SMC-9901
|
| Delay |
Set the length of time, in fields, after a fader is set from the switcher that the switcher ignores movements of
that fader from the audio mixer. |
| Freq |
Select the length of time, in fields, that the switcher will wait between polling the audio mixer for status
information. |
| Max Channels |
Select the maximum number of channels installed on your audio mixer. |
| Mixers |
Select the number of audio mixers you are connecting together and controlling from the same communications port.
You can connect up to two audio mixers together to a single serial communications port. |
| OD Main |
Select the main level on the audio mixer that the switcher, and the OverDrive Production Control System, should be controlling. |
| Pairing |
Select whether the audio channels are paired horizontally (Horizontal) or vertically
(Vertical). |
| PGM Output |
Select the main level control the switcher is assigned to. |
| SDI Inputs |
Set the number of video inputs on your Graphite system. |
| Version |
Select the version number of the audio mixer you are connecting to the selected communications port. |
| XPression Ch |
Set the number of channels coming from the XPression subsystem in Graphite. |
