To Set the User Outputs to the Router

Each ME has 4 configurable outputs to the router matrix.

  1. Press HOME > Setup > ME Out Config.
    Tip: Press ME Outs to view a list of all the video signals assigned to the switcher outputs.
    Tip: You can also reach this menu by pressing the SEL button on the control panel and pressing ME Out Config.
  2. Press User Out Assign.
  3. Press the ME button for the ME that you want to configure the outputs for.
  4. Press the User Out Assign button for the output that you want to assign a different video signal to.
  5. Press the ME Out button for the video signal that you want to assign to the user output.
    Tip: If you want to perform 3D DVE Warp transitions on this ME, User Output 1 and User Output 2 must be assigned to EXT DVE1 and EXT DVE2, respectively.