To Configure a Program Output

Tip:
To configure a program output that is set to FlexiMode, press the SEL button for the ME that you want to configure an output for and press Program Assignment. Individual keys can be included or excluded from each program output from this menu.
  1. Press HOME > Setup > Installation > Program Assignment.
  2. In the Select ME area, press ME X for the ME that you want to configure the output for.

    All the outputs for the selected ME are listed to the right.

  3. Select FlexiMode for an output to allow it to be configured from outside of the Installation menu.
    Tip:
    Including or excluding keys for a program output from the Installation menu is stored in the Installation register and becomes the default state of that output.
  4. Select the keys that you want included in each output for the ME.
  5. Select the buses to use for the background of each output.
    • Bkgd/Pst — sources selected on the background and preset buses of the ME are used.
    • U1/U2 — sources selected on utility bus 1 and utility bus 2 of the ME are used.
    Note:
    You cannot override the Program A output or any of the Preview outputs.
    Tip:
    Assign Program B to use the utility buses U1/U2 to enable Split ME functionality. This can also be done from the Program Assignment menu when Program B is set to FlexiMode.
  6. Press HOME > Confirm.