To Set Up an Effects Dissolve

An effects dissolve is performed between two memories. You must first store your memories with the desired effects rate before you can perform an effects dissolve. Remember to store the same effects rate in the first memory is you want to effects dissolve back from the second memory to the first.

Note:
If the Auto Recall feature is turned Off, you cannot store or recall the Effects Dissolve or Keys Only setting with a memory.
  1. Recall the first memory you want to effect dissolve from.
  2. Toggle EFF DISS on.
  3. Recall the memory you want to effects dissolve to.

    The switcher slews from the first memory to the second memory at the effects rate stored with the second memory.