Home
Operation
How to perform transitions, using keys and key modifiers, memories and custom controls, as well as Media-Store operation.
Clip Player
The clip player offers a single playout channel for clips in the ITU-T H.264 (MPEG-4 AVC) and ITU-T H.265 (MPEG-H HEVC) codecs in specific HD and UHDTV1 video formats that can be assigned as a source on any bus in the switcher. Basic transport controls can be performed manually from the Clip Player page or using custom controls.
To Load a Clip
Clips must be located on the internal hard drive in the /media/clips/video folder. Sub-folders are not supported at this time.

Operation
How to perform transitions, using keys and key modifiers, memories and custom controls, as well as Media-Store operation.
- Audio and Video Processing
  Video and audio signals are processed and passed through the switcher in different ways, depending on how the switcher is being used or is set up. A better understanding of how the switcher is processing these signals help you to achieve the production you want.
- Video Sources
  The switcher has access to three basic types of video sources, external, internal, and follows.
- Video Layering
  How video is layered in the output of the switcher depends on how an ME is re-entered onto the other, and what keyers are on-air for the ME.
- Video Preview
  Video preview allows you to use an additional monitor to preview what the next shot is going to be.
- Matte Source
  Matte color backgrounds (BG) are color signals that can be applied to backgrounds and keys. Color selection is done either by picking a preset color, or by adjusted hue, saturation, and luminance to create a custom color.
- Copying
  You can copy the content of an ME or keyer to another ME or keyer.
- Transitions
  Transitions are used to change the background video and take keys on and off-air. A transition can include any combinations of background and keyers for an ME, MiniME™, or Canvas. The background and each keyer can be transitioned independently.
- Keying
  Keying is the term used to describe when you insert (or electronically cut) portions of one scene into another, or place titles over background images. Keys are made up of two basic components, an alpha, that cuts the hole in the background video, and a fill, that fills the hole with different video.
- Memory Functions
  A memory register is a snapshot of the current state of the switcher that can include one or multiple ME, MiniME™, Canvas, scenes, or chroma key outputs. Up to 100 memory registers per ME, MiniME™, Canvas, scene, or chroma key can be stored and recalled on the switcher. Each of these memory registers can store as little as the information of one ME, or as much as the current state of the entire switcher, including all ME, MiniME™, Canvas, scenes, chroma key outputs, Aux Buses, and DVE settings.
- Audio Mixer
  The audio mixer node in DashBoard provides a graphical interface to all the audio sources and mixer layers. An audio channel must be routed to the switcher to be controllable by the audio mixer interface. Audio sources can come from the embedded audio on an input BNC, through the 1RU Audio Breakout Unit, or from the Media-Store.
- Switcher Sets
  The switcher stores configuration and operation data in a number of registers that contain the individual entries for items such as memories or personality settings. These registers can be stored as a single archive file, or as a register set that contains all the individual register of that type; all memories for example. These files are stored into Sets on USB drive. Different Sets can be created for different shows or applications, allowing you to quickly locate and recall the switcher configurations.
- Media-Store
  The MediaManager interface to the Media-Store allows you to load stills, animations, or audio files and make them available across all MEs. Up to 8 independent channels of video with alpha for playout of stills and animations are available switcher-wide.
- Clip Player
  The clip player offers a single playout channel for clips in the ITU-T H.264 (MPEG-4 AVC) and ITU-T H.265 (MPEG-H HEVC) codecs in specific HD and UHDTV1 video formats that can be assigned as a source on any bus in the switcher. Basic transport controls can be performed manually from the Clip Player page or using custom controls.
  - Clip Specifications
    Clip codecs, formats, switcher formats, and clip names.
  - Clip Player Interface
    The clip player interface (Click Navigation Menu > Live Assist > Media > Clip Player) provides basic transport controls and clip management.
  - To Load a Clip
    Clips must be located on the internal hard drive in the /media/clips/video folder. Sub-folders are not supported at this time.
- Custom Controls
  Once programmed, a custom control (CC) can be played back by pressing a button. The custom control can be as simple as triggering an output GPI pulse, or as complex as recalling a specific memory register on an ME, performing a switcher transition, and selecting a group of keys.
- Sequencer
  The Sequencer allows you to create a playlist of custom control events.
- UltraScene
  UltraScene provides a simplified interface for creating a show with multiple key layers and basic transitions.

To Load a Clip

Clips must be located on the internal hard drive in the /media/clips/video folder. Sub-folders are not supported at this time.

Click Navigation Menu > Live Assist > Media > Clip Player.
Click on the clip you want to load.

Note: The clip player does not support clips with a bit rate of 400Mbps or higher. Clips with a higher bit rate than supported are marked with over their thumbnail. Higher bit rate clips can be played, but will be ejected if they threaten system stability.

Note: The clips is loaded into the channel as soon as you click on it. If a clip is already playing it is ejected and the new clips is loaded.

Tip: If the clip you want to load does not appear in the list, click Refresh Clip List. The switcher re-scans the folder and updates the clip list.

Tip: You can use FTP to copy a clip to the switcher. Refer to To Create an SFTP Connection for information on creating an FTP connection.

The clip is loaded and queued into the clip player.
Click Clip Details to view general, video, and audio information on the currently loaded clip.