Panel Shortcuts

There are a number of button combinations that allow you to reset, copy, or swap configurations.

Function Description
Key Copy Copy the entire contents of a keyer to another keyer in the same, or a different ME. The entire contents of the destination keyer are replaced with the contents of the source keyer.
  1. Press and hold the SEL button for the keyer you want to copy to.
  2. Press and SEL button for the keyer you want to copy from.
Key Swap Swap the entire contents of any two keyers in the same, or different ME. The video source, position, and key type are all swapped between keyers. This allows you to change the apparent key priority, or layering, of the keys in the video output
  1. Press and hold the SEL button for one keyer you want to swap.
  2. Press the KEY X button for the other keyer you want to swap.
ME Copy Copy the content of an ME, MiniME™, or CanvasMultiScreen to another. The entire contents of the destination are replaced with the contents of the source.
  1. Press and hold the BKGD next transition button on the row assigned to the resource you want to copy to.
  2. Press the BKGD next transition button on the row assigned to the resource you want to copy from.
Split Key Assign a different alpha source for a key than the fill/alpha associations that are set up during configuration, or to use a separate alpha source for a Self key.
  1. Select the video source that you want to assign a different alpha to.
  2. Press and hold AUTO/LINEAR or SELF/LUMA.
  3. Select the new alpha source on the key bus.
ME Reset TouchDrive — reset a single resource (ME, MiniME™, CanvasMultiScreen, chroma key).
  1. Press and hold the user button for the resource you want to reset (ME X, MME X, CNVS X). You may have to assign user buttons to these resources.
  2. Press Reset ME on the row control menu.
TouchDrive — reset all resources (ME, MiniME™, CanvasMultiScreen, chroma key).
  1. Press and hold MENU.
  2. Press Reset All.
TouchDrive (2S/3S only) — reset a single resource (ME, MiniME™, etc.).
  1. Assign the panel row to the resource you want to reset.
  2. Press and hold STORE.
  3. Press LOCAL ROW.
TouchDrive (2S/3S only) — reset all resources (ME, MiniME™, CanvasMultiScreen, chroma key).
  1. Press and hold STORE.
  2. Press ALL.
Carbonite Black — reset a single resource (ME, MiniME™, CanvasMultiScreen, chroma key).
  1. Assign the panel row to the resource you want to reset.
  2. Press and hold STORE.
  3. Press RECALL.
Carbonite Black (1 and 2 only) — reset a single resource (ME, MiniME™, CanvasMultiScreen, chroma key).
  1. Assign the panel row to the resource you want to reset.
  2. Press and hold ME X STORE.
  3. Press ME X RECALL.
Key Reset TouchDrive — reset a single keyer.
  1. Press and hold the SEL button for the keyer you want to reset.
  2. Press Reset Key on the row control menu.
Carbonite Black — reset a single keyer.
  1. Press and hold the KEY X SEL button for the keyer you want to reset.
  2. Press RESET.
Trans Reset TouchDrive — reset the selected transition type.
  1. Press and hold the transition type button for the transition you want to reset (DISS, WIPE, DVE, MEDIA WIPE).
  2. Press Reset Trans on the row control menu.
Carbonite Black — reset the selected transition type.
  1. Press and hold the transition type button for the transition you want to reset (DISS, WIPE, DVE, MEDIA WIPE).
  2. Press RESET.
Aux Reset TouchDrive — reset the selected aux bus.
  1. Press and hold the user button for the aux bus (AUX X) you want to reset.
  2. Press Reset Aux on the row control menu.
Carbonite Black — reset the selected aux bus.
  1. Press and hold the AUX X button for the aux bus you want to reset.
  2. Press RESET.