Home
Setup
Reference and audio I/O setup, networking, and audio mixer configuration.
Audio Outputs
Audio sources come out of the system through embedded audio (SDI), analog XLRs (XLR-Analog-Output only), MADI (SFP), or audio over network (AoIP/Dante®). Internal mixer outputs can also be used as output sources.

Setup
Reference and audio I/O setup, networking, and audio mixer configuration.
- Network Setup
  The control network connection for the AudioEdge™ XLR-Analog-Input/Output is separate from the AoIP Primary and Secondary ports and allows you to interface with the system, manage setup files, and collect logs.
- System Access
  Enable or disable system access and control methods such as FTP.
- Reference
  The flexible reference system allows for either video reference or word clock to be used to sync audio across multiple devices.
- Audio Inputs
  Audio sources come into the system through embedded audio (SDI), analog XLRs (XLR-Analog-Input only), MADI (SFP), or audio over network (AoIP or Dante®). Internal mixer outputs can also be used as sources.
- Audio Outputs
  Audio sources come out of the system through embedded audio (SDI), analog XLRs (XLR-Analog-Output only), MADI (SFP), or audio over network (AoIP/Dante®). Internal mixer outputs can also be used as output sources.
  - To Set up an SDI Audio Output
    Embedded audio outputs exit the system through the To Frame HD BNCs.
  - To Set up an Analog Audio Output
    Analog audio outputs exit the system through the XLRs on the front of the system.
  - To Set up a MADI Output
    MADI audio outputs exit the system through the MADI SFP port
  - To Set up Network/Dante® Audio Output (AoIP)
    Network audio outputs exit the system through the AoIP Primary and Secondary ports on the rear of the frame.
- Licenses
  Software options allows you to expand the functionality or resources available to the system. These options can either be licensed at the time you purchase your system, purchased and installed later on, or temporarily licensed through the Ross Platform Manager (RPM).
- GPI Control (XLR-Analog-Output Only)
  General Purpose Interface (GPI) is a high/low voltage signalling protocol that allows the system to send simple commands to an external device, or receive commands from a device. Each pin on the GPI is set as either high (+5 Volts), or low (0 Volts), and it is the switching between high and low that sends commands to the external device, or to the system.
- MIDI Controller
  The MIDI controller is used to control the RAVE audio mixer. The controller connects to RAVE through DashBoard.

Audio Outputs

Audio sources come out of the system through embedded audio (SDI), analog XLRs (XLR-Analog-Output only), MADI (SFP), or audio over network (AoIP/Dante®). Internal mixer outputs can also be used as output sources.

Keep the following in mind:

Keep the following in mind when working with audio outputs:

A Dante® license must be installed to use Dante® as an output.