Reference and audio I/O setup, networking, and audio mixer configuration.
Enable or disable system access and control methods such as FTP.
The control network connection for the AudioEdge™ XLR-Analog-Input/Output is separate from the AoIP Primary and Secondary ports and allows you to interface with the system, manage setup files, and collect logs.
The flexible reference system allows for either video reference or word clock to be used to sync audio across multiple devices.
Audio sources come into the system through embedded audio (SDI), analog XLRs (XLR-Analog-Input only), MADI (SFP), or audio over network (AoIP or Dante®). Internal mixer outputs can also be used as sources.
Audio sources come out of the system through embedded audio (SDI), analog XLRs (XLR-Analog-Output only), MADI (SFP), or audio over network (AoIP/Dante®). Internal mixer outputs can also be used as output sources.
Software options allows you to expand the functionality or resources available to the system. These options can either be licensed at the time you purchase your system, purchased and installed later on, or temporarily licensed through the Ross Platform Manager (RPM).
General Purpose Interface (GPI) is a high/low voltage signalling protocol that allows the system to send simple commands to an external device, or receive commands from a device. Each pin on the GPI is set as either high (+5 Volts), or low (0 Volts), and it is the switching between high and low that sends commands to the external device, or to the system.
The MIDI controller is used to control the RAVE audio mixer. The controller connects to RAVE through DashBoard.
