Home
Setup
Reference and audio I/O setup, networking, and audio mixer configuration.
System Access
Enable or disable system access and control methods such as FTP.
To Enable/Disable a System Access Method

Setup
Reference and audio I/O setup, networking, and audio mixer configuration.
- Network Setup
  The control network connection for the AudioEdge™ XLR-Analog-Input/Output is separate from the AoIP Primary and Secondary ports and allows you to interface with the system, manage setup files, and collect logs.
- System Access
  Enable or disable system access and control methods such as FTP.
  - To Enable/Disable a System Access Method
- Reference
  The flexible reference system allows for either video reference or word clock to be used to sync audio across multiple devices.
- Audio Inputs
  Audio sources come into the system through embedded audio (SDI), analog XLRs (XLR-Analog-Input only), MADI (SFP), or audio over network (AoIP or Dante®). Internal mixer outputs can also be used as sources.
- Audio Outputs
  Audio sources come out of the system through embedded audio (SDI), analog XLRs (XLR-Analog-Output only), MADI (SFP), or audio over network (AoIP/Dante®). Internal mixer outputs can also be used as output sources.
- Licenses
  Software options allows you to expand the functionality or resources available to the system. These options can either be licensed at the time you purchase your system, purchased and installed later on, or temporarily licensed through the Ross Platform Manager (RPM).
- GPI Control (XLR-Analog-Output Only)
  General Purpose Interface (GPI) is a high/low voltage signalling protocol that allows the system to send simple commands to an external device, or receive commands from a device. Each pin on the GPI is set as either high (+5 Volts), or low (0 Volts), and it is the switching between high and low that sends commands to the external device, or to the system.
- MIDI Controller
  The MIDI controller is used to control the RAVE audio mixer. The controller connects to RAVE through DashBoard.

To Enable/Disable a System Access Method

Click Navigation Menu > Configuration > System > Access.

Configure the access method as required.


Method	Description
FTP	Disable FTP connections to the frame (SFTP Only). This prevents all FTP connections. If FTP is disabled SFTP is used. Refer to FTP/SFTP Connection for information on used FTP to connect to the frame.
Role Based Access Control	Ross Platform Manager allows for user authentication and role based access through DashBoard. Refer to To Turn on Role Based Access Control for Ross Platform Manager for more information.
RossTalk	Disable RossTalk connections to the system. The system refuses connections on port 7788.

The system must be re-started for the change to be applied.