Home
Setup
Network connection, video reference, video input and output setup, switcher personality settings, device control and GPIs, aux panels, color correction, and MultiPanel.
Panel Modules
Module Setup

Setup
Network connection, video reference, video input and output setup, switcher personality settings, device control and GPIs, aux panels, color correction, and MultiPanel.
- Network Setup
- Video Reference
- Video Input Setup
- Video Output Setup
- Personality
- GPI Control
- Live Edit Decision Lists
- MultiPanel
- Color Schemes
- Device Control
- Auxiliary Control Panels
- Panel Modules
  - Installing or Replacing a Module
  - Module Setup
    - To Set Up Communication to a SideBox Module
      The SideBox must be set up on an external link on the Acuity® control panel.
    - To Set Up Communication to a SideBoxNet Module
      You can connect up to 15 unique SideBoxNet enclosures to a switcher. The number of each SideSlideNet, SideShotNet, and SideStick modules depends on the type of module you are connecting.
    - To Manually Map Modules to a Row
      Modules are mapped to rows so that the system can identify where the hardware is located on the panel.
    - To Automatically Map Modules to a Row
      Modules are mapped to rows so that the system can identify where the hardware is located on the panel.
  - Custom Control Shot Box Module
  - Audio Control Module
  - SideStick Module
- Acuity Rack Panel
- Color Correction
- High Dynamic Range (HDR) and Wide Color Gamut (WCG) Conversion
- SmartConversion

Module Setup

Modules must be mapped to an internal or external control panel row. This allows the switcher to apply color schemes to the module, as well allow modules to be assigned to MEs or aux buses.

If you are using an external module, such as a SideBox, or SideBoxNet, you must set up communications with that module before you can configure it.