Home
Ultrix Carbonite Mosaic Setup
The Ultrix™ router must be set up to support the Ultrix Carbonite Mosaic on the Software Defined Production Engine (SWR-SDPE) blade. This includes setup of the Ultripower units, DashBoard connections, the matrix database, and the UltriScape Multi-Viewer.
UltriScape Multi-Viewer
Some of the outputs from each ME are available as PiPs for the software defined UltriScape MultiViewer in the router.

Ultrix Carbonite Mosaic Setup
The Ultrix™ router must be set up to support the Ultrix Carbonite Mosaic on the Software Defined Production Engine (SWR-SDPE) blade. This includes setup of the Ultripower units, DashBoard connections, the matrix database, and the UltriScape Multi-Viewer.
- Ultrix Carbonite Mosaic Hardware Setup
  The router and switcher components of Ultrix Carbonite Mosaic must be set up separately before they can work together.
- DashBoard Connection
  Ultrix™ has a separate ethernet connection to DashBoard and appears as a separate node in the DashBoard tree view.
- Video Routing in Ultrix
  Sources and destinations in the router must be connected to the inputs and outputs of the switcher.
- Audio Routing in Ultrix™
  Audio is handled independently in the router and is separate from the switcher. You can output Media-Store and Clip Player audio.
- Routed Tallies
  The switcher must pass tally information to the router so that the router can tally the correct video source that is being passed to the switcher.
- UltriScape Multi-Viewer
  Some of the outputs from each ME are available as PiPs for the software defined UltriScape MultiViewer in the router.

UltriScape Multi-Viewer

Some of the outputs from each ME are available as PiPs for the software defined UltriScape MultiViewer in the router.

Note: Refer to the documentation that came with your router for information on licensing and setting up UltriScape.

Depending on the sources you want to monitor, you can either use the Carbonite MultiViewer, or the Ultrix™ UltriScape. UltriScape has access to all the sources available to the router, and the switcher MultiViewer has access to all the sources available to the switcher.

Important: Only the MultiViewer can be used for ViewControl.