Aux Power Ports (Acuity® Panels)
The aux power ports on the back of the control panel provide power for the touchscreen display and an auxiliary control panel.
CAUTION: Only use the cables provided to connect your Acuity Auxiliary Control Panel or Touchscreen display to the Auxiliary Power module.
Tip: The status LEDs just below the port indicate whether each port is ok (green), or if there is a fault (red). Specific faults are reported on the Status menu.
| Specification | Value |
|---|---|
| Output Voltage | 12VDC |
| Maximum Current | 4A |
| Pin | Signal |
|---|---|
| 1 | GND |
| 2 | n/c |
| 3 | n/c |
| 4 | +12VDC |