Home
Operation
How to perform transitions, using keys and key modifiers, working with memories and switcher setups, Media-Store operation, custom controls, and working in 3D space.
Transition
Performing Transitions
Independent Key Transitions

Operation
How to perform transitions, using keys and key modifiers, working with memories and switcher setups, Media-Store operation, custom controls, and working in 3D space.
- Transition
  - Performing Transitions
    - To Perform a Transition
    - To Perform a Transition on TouchDrive (Memory Area)
      All transitions, with the exception of cuts on the background or key bus, have the same basic setup. The control panel offers physical buttons and mnemonics to setup and perform the transition. Some panels have a memory area that can be used to set the transition rates.
    - To Perform a Transition on TouchDrive (No Memory Area)
      All transitions, with the exception of cuts on the background or key bus, have the same basic setup. The control panel offers physical buttons and mnemonics to setup and perform the transition.
    - Independent Key Transitions
    - Split ME Functionality
  - Transition Rates
  - Cuts
  - Dissolves
  - Wipes
  - DVE Wipes
  - Fade to Black
  - Preset Background
  - WhiteFlash
  - Transition Preview
  - Key Priority Transitions
  - Transition Limits
  - Roll Clip
- Keying
- Key Modifiers
- Memory Functions
- Custom Controls
- Switcher Setups
- Media-Store
- Patterns and Mattes
- Auxiliary Control Panels
- Ultritouch
- Virtual Panels
- DVE Sequences
- Working in 3D Space
- Pre-Loaded Effects

Independent Key Transitions

Keys can be transitioned independently using the dedicated key transition buttons on the Keyers Module. This allows you to dissolve keys on/off-air while the fader is off-limit, or an Auto Transition is in progress from the Transition Module.

Keep the following in mind:

Keep the following in mind when performing independent key transitions:

Only dissolves or cuts can be used for an independent key transition.
If the key is part of the next transition, the key will be dissolved off-air and is removed from the next transition. This applies even if the key was not on-air.
Independent key transitions are performed at the key rate, and not the ME rate.
Each keyer has an independent key rate.
The independent key transitions feature is not compatible with OverDrive® and is disabled when Editor is enabled.