To Add a Panel File

Add a second panel file to the switcher to support multiple panel hardware revisions.

Note: If you are upgrading from 12.1a, or higher, you can add the additional panel file during the normal upgrade procedure.
  1. Open a web browser and navigate to the IP address of the switcher frame. You are prompted to enter a user name and password. The defaults are user and password.
  2. Click Upgrade.

    The Upgrade Page lists all the previous upgrade packages that were stored on the hard drive of the frame.

  3. Select the software version and build currently installed on the switcher that you want to add a Panel file to.
    Tip: The Panel files that are currently included with a software build are listed in the Other Files column.
  4. Click on the "-" (dash) between Upgrade selected version and Delete selected version to show the Advanced Options section.
  5. Select Add/Replace Additional Files.
  6. Click Upgrade selected version.
  7. Click Choose File.
  8. Locate the other Panel upgrade package file you want to upload to the switcher on your computer.
  9. Click Open/Choose to select the file.

    The file path and name appear in the Panel File to Upload field. If the switcher is unable to verify that the file is an upgrade package, an error message is displayed.

  10. Click Add This File.