Home
Setup
Network connection, video reference, video input and output setup, switcher personality settings, device control and GPIs, aux panels, color correction, and MultiPanel.
GPI Control
GPI Tallies
To Set Up a GPI Output Tally
Use a GPI output as a tally.

Setup
Network connection, video reference, video input and output setup, switcher personality settings, device control and GPIs, aux panels, color correction, and MultiPanel.
- Network Setup
- Video Reference
- Video Input Setup
- Video Output Setup
- Personality
- GPI Control
  - GPI Trigger Types
  - To View the Status of a GPI
  - To Set the Direction of a GPI
  - GPI Inputs
  - GPI Tallies
    - To Set Up a GPI Input Tally Override
      Force a tally or GPI output on when a GPI input signal is received.
    - To Set Up a GPI Input Aux Tally
      Use a GPI input to tally an aux bus.
    - To Set Up a GPI Output Tally
      Use a GPI output as a tally.
  - GPI Outputs
  - GPI Device Control
- MultiPanel
- Color Schemes
- Device Control
- Auxiliary Control Panels
- Acuity® Panel Modules
- TouchDrive Panel Modules
- Acuity Rack Panel (ARP)
- Color Correction

To Set Up a GPI Output Tally

Use a GPI output as a tally.

Note: A GPI must be set to an output to be used as a tally. Refer to To Set the Direction of a GPI for information on setting a GPI as an output.

Press HOME > Setup > Installation > Source Configuration > Tally > ME GPOs.
Use the ME GPO knob to select the GPI output that you want use as a tally.
Use the Source knob to select the video source that you want to tally.
Use the Mode knob to select when you want to trigger the GPI output.
- On Air — when the source is on-air. The source is on-air when it is included in the program output of an ME that is tallied.
- Preview — when the source is on preview.
- BnkXAuxY — when the source is active on the selected aux bus.
- Any Aux Bus — when the source is active on any aux bus.
- Preset — when the source is active on the preset of any ME.
- ME X PGM Y — when the source is active on the selected program output of the selected ME.
- ME X PST Y — when the source is active on the selected preset output of the selected ME.
Press HOME > Confirm.