To Set Up a GPI Input

  1. Press HOME > Setup > Installation > GPI Input/Output > Inputs.
  2. Use the GPI Input knob to select the GPI input that you want to assign an event to.
  3. Use the Function knob to select the type of event that you want to assign to the selected GPI input.
    Tip: The Cut and Auto event start a transition in the transition area of the selected ME. Use a memory recall to set up the transition area with the keys and/or background that you want transitioned before the GPI input occurs.
    • Off — no event is triggered.
    • Auto — an auto transition is performed on the selected ME or Fade To Black module. Use the Area knob to select where you want to transition performed.
    • Cut — a cut transition is performed on the selected ME or Fade To Black module. Use the Area knob to select where you want to transition performed.
    • Cust Ctrl — a custom control is run. Use the Cust Ctrl knob to select the custom control you want to run.
    • Mem Recall — a memory is recalled. Use the Memory knob to select the memory you want to recall.
  4. Press GPI Level and use the Level knob to select the trigger signal level that you want to use.
    • Low — the GPI input is triggered when a low signal is received. The GPI input should be receiving a constant high signal. When the signal goes low (0 Volts), the GPI input will respond to the trigger.
    • High — the GPI input triggered when a high signal is received. The GPI input should be receiving a constant low signal. When the signal goes high (+5 Volts), the GPI input will respond to the trigger.
  5. Press HOME > Confirm.