To Set Up a DVE Transition

  1. Press DVE on the Transition module.
    Tip: If you have an Acuity® panel, when you press DVE on the Transition Module, MEx WIPE# is shown on the display of the Global Memory Module. Enter the number of the sequence you want to load using the keypad on the Global Memory Module and press ENTER to load the sequence.
  2. Select the sequence you want to use for the transition.
    Tip: If you know the number for the sequence, you can use the keypad on the Memory area to select it. On the TouchDrive panels the MENU button must be active on the Memory area. On the Acuity® panel the Keypad DVE Entry Personality option must be set to the Memory module you want to use.
  3. Press Direction to select if the wipe moves forward (Fwd) or in reverse (Rev).
    Note: The Direction and Flip Flop features are only available for background transitions. The buttons are gray if a key only transition is selected.
    Tip: If you have a TouchDrive panel, you can tap the Forward (the middle button) on the display in the Transition area and select the direction and flip-flop you want to use for the transition.
  4. Press Flip Flop to select if the wipe moves in the opposite direction with every transition (On), or always moves in one direction (Off).