To Store a Switcher Setup

Note:
If you are updating an older setup file, you must perform a Recall All followed by a Store All. This updates the setup files to the latest format. You can then make changes and store to individual registers if needed.
  1. Press HOME > Disk > Destination / Source.
  2. Use the Disk Type knob to select whether you want to use the hard drive of the switcher (Hard Drive), or a USB drive (USB).
    Note:
    You cannot store or recall files from the USB on the Acuity Rack Panel server. You must store or recall the files from the Local Disk and access it over the network. Point your file explorer to the localdisk folder on the server (\\##.##.##.##\localdisk). The user name is nobody and there is no password.
  3. Use the Set Names knob to select the setup on the drive you want to use.
  4. Press Store.
  5. Select the individual registers, or all of them (All), to be stored in the setup. As you press the buttons, the switcher stores those registers to the setup.