To Configure the Program Assignment

Note: You can only change the settings for a program output that is set to FlexiMode on the Program Assignment Setup menu.
  1. Press HOME > More > Effects > More > ME Selection.
    Tip: You can also press the SEL button on the Acuity® panel or ME on the Row Control on the TouchDrive panel.
  2. In the Select ME area, press ME X for the ME that you want to configure the output for.

    All the outputs for the selected ME are listed to the right.

  3. Select the keys that you want included in each output for the ME.
  4. Select the buses to use for the background of each output.
    • Bkgd/Pst — sources selected on the background and preset buses of the ME are used.
    • U1/U2 — sources selected on utility bus 1 and utility bus 2 of the ME are used.
    Note: You cannot override the Program A output or any of the Preview outputs.
    Tip: Assign Program B to use the utility buses U1/U2 to enable Split ME functionality. This can also be done from the Program Assignment menu when Program B is set to FlexiMode.