To Set Up a Preset Pattern Key

This procedure describes how to set up a preset pattern key. If you want to modify the pattern, refer to To Set Up a Pattern.

Note:
The PST PATT functionality is not mapped to a button on the TouchDrive panel by default. You must assign this function to a button to be able to use the feature. Refer to User Buttons (TouchDrive Only) for information on setting up user buttons.
  1. Press the SEL button on the Keyers module for the key you want to set up and select a video source on the Key bus.
    Tip:
    The SEL button allows you to quickly select the keyer you want to work with and assign the Key bus to the keyer. On the Double-Down control panel, the top button row is assigned to the even numbered keyers (2,4,6) and the button row below is assigned to the odd numbered keyers (1,3,5). This can be changed with the DD Key Delegation personality option.
  2. Press PST PATT.
    Note:
    If the DVE option is installed, the FLY KEY button turns on when a preset pattern key is selected. Turn the FLY KEY button off for a preset pattern key.
    Note:
    The FLY KEY functionality is not mapped to a button on the TouchDrive panel by default. You must assign this function to a button to be able to use the feature. Refer to User Buttons (TouchDrive Only) for information on setting up user buttons.
  3. Press Pattern Selection.
  4. Select the pattern you want to use.
    Tip:
    You can also select the pattern using the keypad on the Global Memory or Effects Memory module to enter the pattern number.
  5. Press UP ONE.
  6. Use the positioner to move the pattern around on the screen and twist the positioner (or use the Size knob) to adjust the size of the pattern.
  7. Use the Softness knob to adjust the softness of the edges of the pattern.