Home
Diagnostics
Switcher status menus and error conditions, installed options, calibration, diagnostics, and logs.
Control Panel Diagnostics
Touchscreen Tests
To Perform a Pattern Test on the Touchscreen
The pattern test allows you to visually check the performance of the touchscreen as it cycles through a number of patterns and colors.

Diagnostics
Switcher status menus and error conditions, installed options, calibration, diagnostics, and logs.
- Status
- Options
- Calibration
- Control Panel Diagnostics
  - Installed Control Panel Boards
  - Module Tests
  - Acuity® Control Panel Power Supply Failure
  - Panel Communications Hub Tests
  - Touchscreen Tests
    - To Perform a Pattern Test on the Touchscreen
      The pattern test allows you to visually check the performance of the touchscreen as it cycles through a number of patterns and colors.
    - To Perform a Draw Test on the Touchscreen
      The draw test allows you to visually check the functionality of the touchscreen by having it feedback the location of where you touch with an X on the screen.
    - To Perform the Burn Mode Test
      The burn mode performs a number of tests on the control panel to ensure that all internal memory and communications ports are operating properly. To ensure that all external communications ports are operating properly, a loopback adapter must be installed on each serial port.
- Frame Diagnostics
- Port Monitoring and Logs

To Perform a Pattern Test on the Touchscreen

The pattern test allows you to visually check the performance of the touchscreen as it cycles through a number of patterns and colors.

Press HOME > More > Diagnostics > Panel Diagnostics > Touch Screen > Test Pattern.

The touchscreen cycles through a number of test patterns of different colors.
Confirm that the touchscreen is showing the pattern correctly, and that the colors and brightness are consistent.

Tip:
You can tap the screen to pause and resume the test.

Tip:
You can exit the test early by pressing any key on an attached keyboard and pressing Exit.

The test will repeat three times and then exit.