Home
Diagnostics
Switcher status menus and error conditions, installed options, calibration, diagnostics, and logs.
Control Panel Diagnostics
Touchscreen Tests
To Perform a Draw Test on the Touchscreen
The draw test allows you to visually check the functionality of the touchscreen by having it feedback the location of where you touch with an X on the screen.

Diagnostics
Switcher status menus and error conditions, installed options, calibration, diagnostics, and logs.
- Status
- Options
- Calibration
- Control Panel Diagnostics
  - Installed Control Panel Boards
  - Module Tests
  - Acuity® Control Panel Power Supply Failure
  - Panel Communications Hub Tests
  - Touchscreen Tests
    - To Perform a Pattern Test on the Touchscreen
      The pattern test allows you to visually check the performance of the touchscreen as it cycles through a number of patterns and colors.
    - To Perform a Draw Test on the Touchscreen
      The draw test allows you to visually check the functionality of the touchscreen by having it feedback the location of where you touch with an X on the screen.
    - To Perform the Burn Mode Test
      The burn mode performs a number of tests on the control panel to ensure that all internal memory and communications ports are operating properly. To ensure that all external communications ports are operating properly, a loopback adapter must be installed on each serial port.
- Frame Diagnostics
- Port Monitoring and Logs

To Perform a Draw Test on the Touchscreen

The draw test allows you to visually check the functionality of the touchscreen by having it feedback the location of where you touch with an X on the screen.

Press HOME > More > Diagnostics > Panel Diagnostics.
Tap the screen to start the test.
Trace the yellow line from the X to the O with your finger.
Press Quit.