To Set Up a Video Processor MultiViewer

Select a layout for the Video Processor MultiViewer, assign sources to the boxes, and configure mnemonic names and tallies.

  1. Click Navigation Menu > Configuration > MultiViewers and click the MV VP button for the Video Processor MultiViewer you want to set up.


  2. Click the Layout button and select the arrangement of the boxes that you want to use for the selected Video Processor MultiViewer.


  3. Use the Transparency slider to adjust the transparency of the background behind the source label for the selected Video Processor MultiViewer.
  4. Apply an overlay to the Video Processor MultiViewer as follows(HD Only):
    1. Click the Overlay button and click On to turn the overlay on, or Off to turn it off.


      Note: The overlay feature is only available when a layout of less than 16 boxes is used.
      Tip: The overlay is primarily used for ViewControl, but can also be used to overlay a camera shot of a shot-clock over the MultiViewer output.
    2. Click the Source button for the video source that you want to overlay over the Video Processor MultiViewer output.
    3. Use the Clip slider to adjust the clipping of the overlay source.

      At 0% the overlay source is completely opaque, and at 100% it is completely transparent.

  5. Click a Tally button to select how boxes on the Video Processor MultiViewer are tallied.
    • Box — red or green border is shown around the outside of the Video Processor MultiViewer box
    • Label — red or green boxes are shown inside the label area of the Video Processor MultiViewer box
    • Label Reverse — the same as Label, but the placement of the tally boxes is swapped
  6. Click an FS Label button to select whether FSFC is shown on the source labels (On) or not (Off) when a FSFC is applied to the source.
  7. Click Shift Panel and select the panel that you want the MultiViewer shift to be active on. When the Shift button is pressed on the assigned control panel the MultiViewer shows the shifted sources.
    Note: The shift function can only be assigned to a single panel at a time.


    Tip: When the MultiViewer Shift is active, the box buttons on the layout show the shifted source in brackets.
  8. Click on one of the Boxes buttons and set up how that box appears on the Video Processor MultiViewer in the standard and shifted configuration.


    • Physical — the physical inputs to the switcher on the input BNCs.
    • Internal — the internally generated sources of the switcher (ME, MiniME™, chroma key outputs, etc.).
    • Media — the Media​-Store and MediaWipe sources.
    • Aux Follows — the aux buses.
    • ME Follows — the background, preset, and key buses of each ME.
    • MiniME Follows — the background, preset, and key buses of each MiniME™.
    • Follows — the background, preset, and key buses of each Canvas.
  9. Select how you want that box to appear on the I/O MultiViewer.
    Tip: Click Apply to All to have the settings for the current box applied to all boxes in MultiViewer. This does not include what video source is assigned to the box.
    Option Description
    Green Tally Turn the preview (green) tally for the I/O MultiViewer box on or off.
    Red Tally Turn the program (red) tally for the I/O MultiViewer box on or off.
    Border Turn the border around the I/O MultiViewer box off (Off), white (White), or black (Black). When the border is turned off, some distortion may be visible around the edges of the box.
    Label Turn source labels for the I/O MultiViewer box off, or on in a selected position.
    Label Pos Select a position for the source label for the I/O MultiViewer box(Bottom or Top).
    Display Select what name is shows on the label.
    • Fixed — show only the text entered in the Fixed Label field as the name.
    • Switcher — show only the internal mnemonic name.
    • Router — show only the TSL UMD name.
    • Switcher and Router — show both the internal and TSL UMD name
    Tip: If you select a source on an aux bus that does not have a TSL UMD name, the mnemonic name is used instead on the MultiViewer.
    Aspect Turn aspect ratio markers for the I/O MultiViewer box on (Aspect) or off (Off).
    Shift Source Turn the shifted source on (On) or off (Off) for the selected box. When the MultiViewer is shifted, the source in this box will not change.