Home
HyperMax Setup
The Ultrix™ router must be set up to support the HyperMax on the Software Defined Production Engine (SWR-SDPE) blade. This includes setup of the Ultripower units, DashBoard connections, the matrix database, and the Ultriscape Multi-Viewer.
DashBoard Connection
Ultrix™ has a separate ethernet connection to DashBoard and appears as a separate node in the DashBoard tree view.

HyperMax Setup
The Ultrix™ router must be set up to support the HyperMax on the Software Defined Production Engine (SWR-SDPE) blade. This includes setup of the Ultripower units, DashBoard connections, the matrix database, and the Ultriscape Multi-Viewer.
- HyperMax Hardware Setup
  The router and switcher components of HyperMax must be set up separately before they can work together.
- DashBoard Connection
  Ultrix™ has a separate ethernet connection to DashBoard and appears as a separate node in the DashBoard tree view.
  - To Assign an IP Address to Ultrix™ and Ultripower
    Use DashBoard Walkabout to assign an initial IP address to Ultrix™.
  - To Connect to Ultrix™ from DashBoard
    DashBoard connects to each device separately. You must create a new connection for Ultrix™, the Ultripower units, and Ultricool.
- Video Routing in Ultrix
  Sources and destinations in the router must be connected to the inputs and outputs of the switcher.
- Audio Routing in Ultrix™
  Audio is handled independently in the router and is separate from the switcher. You can output Media-Store and Clip Player audio.
- Aux Bus Router Sources
  Switcher aux buses need to be mapped to router sources and destinations so that video can be assigned to them.
- Ultriscape Multi-Viewer
  Some of the outputs from each ME are available as PiPs for the software defined Ultriscape MultiViewer in the router.
- Ultrix™ Ultricore BCS Setup
  If your router ecosystem uses an Ultricore BCS, the switcher requires the IP address of the Ultricore BCS to communicate with the router to switch aux buses.

DashBoard Connection

Ultrix™ has a separate ethernet connection to DashBoard and appears as a separate node in the DashBoard tree view.

Note: Refer to the documentation that came with your Ultrix™ router for information on connecting it to DashBoard.