Home
Setup
Network connection, video reference, video input and output setup, switcher personality settings, device control and GPIs, aux panels, color correction, and MultiPanel.
Network Setup
Default Network Settings

Setup
Network connection, video reference, video input and output setup, switcher personality settings, device control and GPIs, aux panels, color correction, and MultiPanel.
- Network Setup
  - Switcher Network Setup
    From the web interface, you can set up the IP Address, as well as selecting the IP addresses of all the control panels, and SoftPanel that can access the switcher.
  - Control Panel Network Setup
  - Default Network Settings
    - To Default the Frame Network Settings
  - Network Security
  - System Time
- Video Reference
- Video Input Setup
- Video Output Setup
- Personality
- GPI Control
- Live Edit Decision Lists
- MultiPanel
- Color Schemes
- Device Control
- Auxiliary Control Panels
- Acuity® Panel Modules
- TouchDrive Panel Modules
- Acuity Rack Panel (ARP)
- Color Correction
- High Dynamic Range (HDR) and Wide Color Gamut (WCG) Conversion
- SmartConversion

Default Network Settings

The control panel and frame are set with default network addresses from the factory. The frame can be manually configured to these settings using a DIP switch on the Frame CPU board.

Table 1. Default Network Settings
	Frame	Acuity® Panel	TouchDrive Panel
IP Address	192.168.1.1	192.168.1.2	192.168.0.129
Subnet Mask	255.255.0.0
Gateway	0.0.0.0