To Set a Reference Format

  1. Press HOME > Setup > Installation > More > Reference.
  2. Toggle Reference to select between an internal reference (Int) or an external reference (Ext).

    If you select an external reference, you must select the board that the reference signal is connected to.

  3. Use the Ref Board knob to select the board you have connected reference to.
  4. Use the Ref Format knob to select the format of the input reference.
  5. Use the Video Format knob to select the video format you want the switcher to operate in.
    Note: When you select a UHDTV1 video mode, the entire switcher is reconfigured to process UHDTV1 video.
  6. Use the Color Gamut buttons to set the color gamut you want the switcher to operate in.
    Note: There are restrictions on the types of HDR and color gamut conversion you can do, and you can adjust the scaling of the conversion. Refer to High Dynamic Range (HDR) and Wide Color Gamut (WCG) Conversion for more information.
    • BT.709 — color gamut recommended for HD video signals.
    • BT.2020 — wide color gamut recommended for UHDTV1 video signals.
  7. Use the Dynamic Range buttons to set the dynamic range you want the switcher to operate in.
    • SDR — Standard Dynamic Range.
    • HLG — Hybrid Log Gamma.
    • PQ — Perceptual Quantizer.
    • S-Log3 — Sony® S-Log3.
  8. Press HOME > Confirm.