To Set Up an FSFC

  1. Press HOME > Setup > Installation > Source Configuration > BNC Configuration.
  2. Use the Physical BNC knob to select the BNC that you want to sync or delay.
  3. Use the Video Format knob to select the format of the video signal being fed in on the selected BNC.
  4. In the Frame Sync area, select how you want to apply the frame sync.
    • OFF — no frame sync is applied to the input.
    • Sync — a frame sync is applied to the input.
    • Delay — use the Delay knob to select the number of frames that you want to delay the input.
  5. In the Framing area, select how to apply aspect ratio conversion between 4:3 and 16:9.
    • Full — video signal is scaled disproportionately to fill the display of the new aspect ratio. Aspect distortion occurs as the image is stretched/compressed to fit in the new aspect ratio.
    • Zoom — video signal is zoomed to fill the display of the new video format. No aspect distortion is introduced but the edges of the video signal may be cropped
    • Letterbox — black bars are added to the top and bottom of a 16:9 image to display correctly in a 4:3 video format.
    • Pillarbox — black bars are added to the right and left of a 4:3 image to display correctly in a 16:9 video format.
  6. In the UHD QUAD to 2SI Conversion area, select whether to convert the input video from UHD-​QSD to UHD-​2SI.
  7. Press HOME > Confirm.