Home
Setup
Network connection, video reference, video input and output setup, switcher personality settings, device control and GPIs, aux panels, color correction, and MultiPanel.
SmartConversion
SmartConversion Setup
To Enable a Bus to Use SmartConversion
Selecting which buses, or video signals, SmartConversion can convert allows you to prevent SmartConversion from converting video signals that you want to remain in non-native video format. This will also help to limit the usage of conversion loops for buses that do not need to be converted.

Setup
Network connection, video reference, video input and output setup, switcher personality settings, device control and GPIs, aux panels, color correction, and MultiPanel.
- Network Setup
- Video Reference
- Video Input Setup
- Video Output Setup
- Personality
- GPI Control
- Live Edit Decision Lists
- MultiPanel
- Color Schemes
- Device Control
- Auxiliary Control Panels
- Panel Modules
- Acuity Rack Panel
- Color Correction
- High Dynamic Range (HDR) and Wide Color Gamut (WCG) Conversion
- SmartConversion
  - Conversion Loops
  - SmartConversion Setup
    - To Enable a Bus to Use SmartConversion
      Selecting which buses, or video signals, SmartConversion can convert allows you to prevent SmartConversion from converting video signals that you want to remain in non-native video format. This will also help to limit the usage of conversion loops for buses that do not need to be converted.
    - To Lock a Conversion Loop to a Bus
      You can lock a specific conversion loop to a bus. This dedicates that up/down converter to the selected bus preventing SmartConversion from using it somewhere else.
    - To Set the Fade to Black Display Mode
      The display on the Fade to Black module can display either the current fade rate or the number of available up/down converters.

To Enable a Bus to Use SmartConversion

Selecting which buses, or video signals, SmartConversion can convert allows you to prevent SmartConversion from converting video signals that you want to remain in non-native video format. This will also help to limit the usage of conversion loops for buses that do not need to be converted.

Press HOME > Setup > Installation > Aux Bus > SmartConversion > Bus Disabling.
Use the Bus knob to select the bus, or video source, that you want to assign to use SmartConversion.
- MEX Program — ME X Program
- MEX Program — ME X Program
- MEX KY Video — ME X Key Y video
- MEX KY Alpha — ME X Key Y alpha
- MEX UtilityY — ME X Utility Bus Y
- MEX DSKY Video — ME X DSK Y video
- MEX DSKY Alpha — ME X DSK Y alpha
- MEX KY BackV — ME X Key Y backside video
- MEX KY BackA — ME X Key Y backside alpha
- Aux Bus X — Aux Bus X
Use the Conv. Enable knob to allow the selected bus to use SmartConversion (Yes), or not (Off).
Press HOME > Confirm.