To Set Up a WhiteFlash Transition
A WhiteFlash transition is performed just like a normal dissolve except that you must set the color for the flash and the rates for the onset, hold, and fade.
-
Double-press DISS.
Tip: On the WhiteFlash Setup menu, you can select a different ME to set up WhiteFlash for.The DISS button flashes, indicating a WhiteFlash transition has been selected.
- Press Color and use the color picker to select the color you want to use.
-
Press ME Rate to use the ME rate for the transition
(Yes), or not (No).
- Yes — use the ME Rate as the transition rate for the WhiteFlash. The Onset, Hold, and Fade rates represent proportional values of the total ME Rate.
- No — use the value (in frames) of the Onset, Hold, and Fade rates for each part of the WhiteFlash. The ME Rate is not used for this transition.
-
If ME Rate is set to No, press Timing
Settings and use the Onset, Hold, and
Fade knobs to set those parts of the transition.
- Onset — duration of the dissolve to the WhiteFlash color.
- Hold — length of time that the WhiteFlash color is held.
- Fade — duration of the dissolve to the preset video source.
Tip: Press Assign As Default to store your current settings as the default
settings for a WhiteFlash transition.