Audio Mixer (RAVE)

Channel Events

Event Location Description
AFV Audio Mixer > Channel > AFV Enable Turn on Audio Follow Video (AFV) for a channel.
  1. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
  2. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  3. Click the Value button to turn on AFV for the selected channel (On), or turn it off (Off).
AFV Volume Audio Mixer > Channel > AFV Volume Set the level for AFV for a channel.
  1. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  2. In the AFV Volume (dB) field, enter the level for the selected channel.
  3. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
Aux Pre/Post Audio Mixer > Channel > Aux Pre/Post Set whether the source on an aux is take before or after the fader.
  1. Click the InnerAudioMixerOutput button and select the mixer output that you want to send the command to.
  2. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  3. Click the Value button to set the aux source to post-fader (Post), or pre-fader (Pre).
  4. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
Balance/Pan Audio Mixer > Channel > Balance/Pan Set the balance or pan for the selected channel.
  1. Click the InnerAudioMixerOutput button and select the mixer output that you want to send the command to.
  2. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  3. In the Value (%) field, enter the balance or pan you want to apply.
  4. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
Input Volume Audio Mixer > Channel > Volume Set the level for the selected channel.
  1. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  2. In the Volume (dB) field, enter the level you want to set.
  3. Click the InnerAudioMixerOutput button and select the mixer output that you want to send the command to.
  4. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
Mute Audio Mixer > Channel > Mute Mute the selected channel.
  1. Click the InnerAudioMixerOutput button and select the mixer output that you want to send the command to.
  2. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  3. Click the Value button to mute the selected channel (On), or un-mute it (Off).
  4. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
PFL Audio Mixer > Channel > PFL Set Pre Fader Listen (PFL) for a channel.
  1. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
  2. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  3. Click the Value button to turn on PFL for the selected channel (On), or turn it off (Off).
Solo Audio Mixer > Channel > Solo Set the selected channel to solo.
  1. Click the InnerAudioMixerOutput button and select the mixer output that you want to send the command to.
  2. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  3. Click the Value button to solo the selected channel (On), or un-solo it (Off).
  4. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.

Noise Gate Events

Event Location Description
Attack Audio Mixer > Noise Gate > Attack Select the amount of time (ms) you want to pass between when the noise gate is triggered to open (pass the threshold) and the attenuation being fully released.
  1. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  2. Enter the time for the event in the Transition Time (ms) field.
  3. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
Bypass Audio Mixer > Noise Gate > Bypass Bypass the noise gate.
  1. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
  2. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  3. Click a Value button to turn bypass on (On) or off (Off).
Default All NG Audio Mixer > Noise Gate > Default All NG Default the NG for all audio channels.
Default NG Channel Audio Mixer > Noise Gate > Default NG Selection Default the NG for a selected audio channel.
  1. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
Depth Audio Mixer > Noise Gate > Attack Select the level that the audio signal must go below the threshold before the noise gate is triggered to close.
  1. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  2. Enter the new gain value in n the Gain (dB) field.
  3. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
Hold Audio Mixer > Noise Gate > Hold Select the amount of time (s) between when the noise gate is triggered to close (level is below the Depth) and the Release is applied.
  1. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  2. Enter the time for the event in the Transition Time (ms) field.
  3. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
Release Audio Mixer > Noise Gate > Release Select the amount of time (ms) you want to pass after the Hold is applied and the gate is fully closed (full Reduction is applied).
  1. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  2. Enter the time for the event in the Transition Time (ms) field.
  3. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
Threshold Audio Mixer > Noise Gate > Threshold Select the level (-dB) at which the noise gate opens.
  1. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  2. Enter the new gain value in n the Gain (dB) field.
  3. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.

Ducking Events

Event Location Description
Attack Audio Mixer > Mixer Ducking > Ducking Mode Select the amount of time (ms) you want to pass between when ducking is triggered to apply (pass the threshold) and the attenuation being fully applied to the mix.
  1. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  2. Enter the new gain value in n the Gain (dB) field.
  3. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
Default All Ducking Audio Mixer > Mixer Ducking > Ducking Mode Default the ducking for all audio channels.
  1. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  2. Enter the new gain value in n the Gain (dB) field.
  3. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
Default Ducking Channel Audio Mixer > Mixer Ducking > Ducking Mode Default the ducking for a selected audio channel.
  1. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  2. Enter the new gain value in n the Gain (dB) field.
  3. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
Depth Audio Mixer > Mixer Ducking > Ducking Mode Select the level that the audio signal must go below the threshold before the ducking is removed.
  1. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  2. Enter the new gain value in n the Gain (dB) field.
  3. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
Ducking Mode Audio Mixer > Mixer Ducking > Ducking Mode Turn on Ducking for the selected channel.
  1. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
  2. Click Ducking Mode.
Hold Audio Mixer > Mixer Ducking > Ducking Mode Select the amount of time (s) between when ducking is triggered to release (level is below the Depth) and the Release is applied.
  1. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  2. Enter the new gain value in n the Gain (dB) field.
  3. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
Mix Reduction Audio Mixer > Mixer Ducking > Ducking Mode Select the amount of attenuation/gain (dB) that you want to reduce the mix by when the ducking is applied (above threshold).
  1. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  2. Enter the new gain value in n the Gain (dB) field.
  3. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
Release Audio Mixer > Mixer Ducking > Ducking Mode Select the amount of time (ms) you want to pass after the Hold is applied and the ducking is fully released (mix back to normal levels).
  1. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  2. Enter the new gain value in n the Gain (dB) field.
  3. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
Threshold Audio Mixer > Mixer Ducking > Ducking Mode Select the level (-dB) at which the ducking is applied to the mix.
  1. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  2. Enter the new gain value in n the Gain (dB) field.
  3. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.

Talkback Events

Event Location Description
Attack Audio Mixer > Mixer Ducking > Ducking Mode Select the amount of time (ms) you want to pass between when talkback is triggered to apply and the attenuation being fully applied to the mix.
  1. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  2. Enter the new gain value in n the Gain (dB) field.
  3. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
Default All Talkback Audio Mixer > Mixer Ducking > Ducking Mode Default the talkback for all audio channels.
  1. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  2. Enter the new gain value in n the Gain (dB) field.
  3. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
Default Talkback Channel Audio Mixer > Mixer Ducking > Ducking Mode Default the talkback for a selected audio channel.
  1. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  2. Enter the new gain value in n the Gain (dB) field.
  3. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
Hold Audio Mixer > Mixer Ducking > Ducking Mode Select the amount of time (s) between when talkback is released (Talkback button is released) and the Release is applied.
  1. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  2. Enter the new gain value in n the Gain (dB) field.
  3. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
Mix Reduction Audio Mixer > Mixer Ducking > Ducking Mode Select the amount of attenuation/gain (dB) that you want to reduce the mix by when the talkback is applied (Talkback button held).
  1. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  2. Enter the new gain value in n the Gain (dB) field.
  3. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
Release Audio Mixer > Mixer Ducking > Ducking Mode Select the amount of time (ms) you want to pass after the Hold is applied and the talkback is fully released (mix back to normal levels).
  1. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  2. Enter the new gain value in n the Gain (dB) field.
  3. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
Talkback Mode Audio Mixer > Mixer Ducking > Ducking Mode Turn on Talkback for the selected channel.
  1. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
  2. Click Talkback Mode.

Equalizer Events

Event Location Description
Default All EQ Audio Mixer > Equalizer Default the equalizer for all audio channels.
  1. Click Default All EQ.
Default Selected EQ Audio Mixer > Equalizer Default the equalizer for a selected audio channel.
  1. Click Default EQ Selection.
  2. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
EQ Bypass Audio Mixer > Equalizer Bypass equalizer.
  1. Click Bypass.
  2. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
  3. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  4. Click the Value button to turn bypass on (On), or off (Off).
High Shelf Gain Audio Mixer > Equalizer Adjust the gain of the high frequency band.
  1. Click High Shelf 1 Gain.
  2. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  3. Enter the new gain value in n the Gain (dB) field.
  4. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
High Shelf Min Freq Audio Mixer > Equalizer Set the high shelf minimum frequency.
  1. Click High Shelf Min Freq.
  2. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  3. In the Frequency (Hz) field, enter the new frequency setting.
  4. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
Low Shelf Gain Audio Mixer > Equalizer > Low Shelf Gain Adjust the gain of the low frequency band.
  1. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  2. Enter the new gain value in n the Gain (dB) field.
  3. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
Midrange 1 Center Freq Audio Mixer > Equalizer Set the midrange 1 center frequency.
  1. Click Midrange 1 Center Freq.
  2. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  3. In the Frequency (Hz) field, enter the new frequency setting.
  4. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
Midrange 1 Gain Audio Mixer > Equalizer Adjust the gain of a midrange frequency band.
  1. Click Midrange 1 Gain.
  2. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  3. Enter the new gain value in n the Gain (dB) field.
  4. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
Midrange 1 Q Audio Mixer > Equalizer Set the midrange 1 Q.
  1. Click Midrange 1 Q.
  2. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  3. In the Value (%) field, enter the new Q setting.
  4. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
Midrange 2 Center Freq Audio Mixer > Equalizer Set the midrange 2 center frequency.
  1. Click Midrange 2 Center Freq.
  2. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  3. In the Frequency (Hz) field, enter the new frequency setting.
  4. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
Midrange 2 Gain Audio Mixer > Equalizer Adjust the gain of a midrange frequency band.
  1. Click Midrange 2 Gain.
  2. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  3. Enter the new gain value in n the Gain (dB) field.
  4. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
Midrange 2 Q Audio Mixer > Equalizer Set the midrange 2 Q.
  1. Click Midrange 2 Q.
  2. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  3. In the Value (%) field, enter the new Q setting.
  4. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.

Compressor Limiter Events

Event Location Description
Attack Audio Mixer > Compressor Limiter Set the attack for CL.
  1. Click Attack.
  2. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  3. In the Transition Time (ms) field, enter the new attack time setting.
  4. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
Channel AFV Fade Audio Mixer > Config Select whether AFV transitions use a fade or a cut.
  1. Click Channel AFV Fade.
  2. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
  3. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  4. Click a Value button to select whether AFV transition use a fade (On) or a cut (Off).
Channel Position Audio Mixer > Config Move a fader stripe left or right on the mix layer in the RAVE audio mixer.
  1. Click Channel Position.
  2. Click the InnerAudioMixerOutput button and select the mixer output that you want to send the command to.
  3. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
  4. Click an Action button to move the stripe to the left of the layer (Up) or to the right (Down).
Channel Processing Order (EQ/CL) Audio Mixer > Config Select the EQ and CL processing order for specific fader.
  1. Click Channel Processing Order.
  2. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
  3. Click a Component button to select whether you are assigning the order for the EQ (EQ) or CL (CL).
  4. Click a Position button to select whether the EQ or CL processing is applied first (1) or last (2).
Channel Visible Audio Mixer > Config Select whether AFV transitions use a fade or a cut.
  1. Click Channel Visible.
  2. Click the InnerAudioMixerOutput button and select the mixer output that you want to send the command to.
  3. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
  4. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  5. Click a Value button to select whether the selected fader is visible on the mixer (On) or a not (Off).
CL Bypass Audio Mixer > Compressor Limiter Bypass CL.
  1. Click Bypass.
  2. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
  3. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  4. Click the Value button to turn bypass on (On), or off (Off).
Clear PFL Audio Mixer > Output Clear Pre Fader Listen (PFL).
  1. Click Clear PFL.
Clear Solo Audio Mixer > Output Clear solo for an output.
  1. Click Clear Solo.
  2. Click the InnerAudioMixerOutput button and select the mixer output that you want to send the command to.
Compression Audio Mixer > Compressor Limiter Set the compression ratio for CL.
  1. Click Compression.
  2. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  3. In the Ratio (:1) field, enter the new ratio for the compression setting.
  4. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
Default All CL Audio Mixer > Compressor Limiter Default All CL setting.
  1. Click Default All CL.
Default Selected CL Audio Mixer > Compressor Limiter Default CL settings.
  1. Click Default CL Selection.
  2. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
Makeup Audio Mixer > Compressor Limiter Set the makeup level for CL.
  1. Click Makeup.
  2. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  3. Enter the new gain value in n the Gain (dB) field.
  4. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
Output Volume Audio Mixer > Output Set the output volume.
  1. Click Volume.
  2. Click the InnerAudioMixerOutput button and select the mixer output that you want to send the command to.
  3. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  4. In the Volume (dB) field, enter the level you want to set.
Pad Audio Mixer > PreAmp Turn pad power on or off on a ABU.
  1. Click Pad.
  2. Click the InnerAudioMixerAnalogInput button and select the analog input you want to send the command to.
  3. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  4. Click the Value button to turn pad on (On), or off (Off).
Phantom Power Audio Mixer > PreAmp Turn phantom power on or off on a ABU.
  1. Click Phantom Power.
  2. Click the InnerAudioMixerAnalogInput button and select the analog input you want to send the command to.
  3. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  4. Click the Value button to turn phantom power on (On), or off (Off).
Pre-Amp Gain Audio Mixer > PreAmp Set the pre-amp gain on a ABU analog input.
  1. Click Gain.
  2. Click the InnerAudioMixerAnalogInput button and select the analog input you want to send the command to.
  3. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  4. Enter the new gain value in n the Gain (dB) field.
Processing Order (EQ/CL) Audio Mixer > Config Select the EQ and CL processing order for all faders.
  1. Click Processing Order.
  2. Click a Component button to select whether you are assigning the order for the EQ (EQ) or CL (CL).
  3. Click a Position button to select whether the EQ or CL processing is applied first (1) or last (2).
Release Audio Mixer > Compressor Limiter Set the release for CL.
  1. Click Release.
  2. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  3. In the Transition Time (ms) field, enter the new release time setting.
  4. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
Source AFV Input Audio Mixer > Config Select the video source that you want a fader to follow.
  1. Click Source AFV Input.
  2. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
  3. Click the Value button and select the video source that you want the audio fader to follow.
Source Audio Channel Audio Mixer > Config Select the audio channels to be assigned to a fader.
  1. Click Source Audio Channel.
  2. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
  3. Click the Value button and select the channels you want to assign to the fader.
Source Audio Input Audio Mixer > Config Select the audio source to be assigned to a fader.
  1. Click Source Audio Input.
  2. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
  3. Click the Value button and select the audio source you want assigned to the fader.
Threshold Control Audio Mixer > Compressor Limiter Set the threshold control for CL.
  1. Click Threshold Control.
  2. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  3. Enter the new gain value in n the Gain (dB) field.
  4. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
Video Out Audio Mix Audio Mixer > Output Set what audio is embedded in an video output.
  1. Click Video Out Audio Mix.
  2. Click the Output button and select video output that you want to set up.
  3. Click a Value button to select which audio is embedded in the selected output video stream.
Video Out Custom Audio Mix Audio Mixer > Output Set what audio is embedded in an video output.
  1. Click Video Out Custom Audio Mix.
  2. Click the Output button and select video output that you want to set up.
  3. Click the Channel button and select the stereo pair that you want to embed audio on.
  4. Click the Audio Mix button and select the mix that you want to embed on the selected channels.

Output Audio Events

Event Location Description
ABM Input Delay Audio Mixer > ABM Input > Delay Add a delay to the audio inputs on the ABU.
  1. Click Pad.
  2. Click the InnerAudioMixerAnalogInput button and select the analog input you want to send the command to.
  3. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  4. Enter the amount of delay (0-16) in the Value field.
Clear PFL Audio Mixer > Output > Clear PFL Clear Pre Fader Listen (PFL).
Clear Solo Audio Mixer > Output > Clear Solo Clear solo for an output.
  1. Click the InnerAudioMixerOutput button and select the mixer output that you want to send the command to.
Output Volume Audio Mixer > Output > Volume Set the output volume.
  1. Click the InnerAudioMixerOutput button and select the mixer output that you want to send the command to.
  2. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  3. In the Volume (dB) field, enter the level you want to set.
Pad Audio Mixer > PreAmp Turn pad power on or off on a ABU.
  1. Click Pad.
  2. Click the InnerAudioMixerAnalogInput button and select the analog input you want to send the command to.
  3. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  4. Click the Value button to turn pad on (On), or off (Off).
Phantom Power Audio Mixer > PreAmp Turn phantom power on or off on a ABU.
  1. Click Phantom Power.
  2. Click the InnerAudioMixerAnalogInput button and select the analog input you want to send the command to.
  3. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  4. Click the Value button to turn phantom power on (On), or off (Off).
Pre-Amp Gain Audio Mixer > PreAmp Set the pre-amp gain on a ABU analog input.
  1. Click Gain.
  2. Click the InnerAudioMixerAnalogInput button and select the analog input you want to send the command to.
  3. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  4. Enter the new gain value in n the Gain (dB) field.
Video Out Audio Mix Audio Mixer > Output > Video Out Audio Mix Set what audio is embedded in an video output.
  1. Click the Output button and select video output that you want to set up.
  2. Click a Value button to select which audio is embedded in the selected output video stream.
Video Out Custom Audio Mix Audio Mixer > Output > Video Out Custom Audio Mix Set what audio is embedded in an video output.
  1. Click the Output button and select video output that you want to set up.
  2. Click the Channel button and select the stereo pair that you want to embed audio on.
  3. Click the Audio Mix button and select the mix that you want to embed on the selected channels.

Configuration Audio Events

Event Location Description
Channel AFV Fade Audio Mixer > Config > Channel AFV Fade Select whether AFV transitions use a fade or a cut.
  1. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
  2. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  3. Click a Value button to select whether AFV transition use a fade (On) or a cut (Off).
Channel Position Audio Mixer > Config > Channel Position Move a fader stripe left or right on the mix layer in the RAVE audio mixer.
  1. Click the InnerAudioMixerOutput button and select the mixer output that you want to send the command to.
  2. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
  3. Click an Action button to move the stripe to the left of the layer (Up) or to the right (Down).
Channel Processing Order (EQ/CL) Audio Mixer > Config > Processing Order Select the EQ and CL processing order for specific fader.
  1. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
  2. Click a Component button to select whether you are assigning the order for the EQ (EQ) or CL (CL).
  3. Click a Position button to select whether the EQ or CL processing is applied first (1) or last (2).
Channel Visible Audio Mixer > Config > Channel Visible Select whether AFV transitions use a fade or a cut.
  1. Click the InnerAudioMixerOutput button and select the mixer output that you want to send the command to.
  2. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
  3. Click the Change Type button and select whether you want to set (Absolute) or reset (Reset) the parameter. Some selections will not be available when you reset the parameter.
  4. Click a Value button to select whether the selected fader is visible on the mixer (On) or a not (Off).
Processing Order (EQ/CL) Audio Mixer > Config > Channel Processing Order Select the EQ and CL processing order for all faders.
  1. Click a Component button to select whether you are assigning the order for the EQ (EQ) or CL (CL).
  2. Click a Position button to select whether the EQ or CL processing is applied first (1) or last (2).
Source AFV Input Audio Mixer > Config > Source AVF Input Select the video source that you want a fader to follow.
  1. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
  2. Click the Value button and select the video source that you want the audio fader to follow.
Source Audio Channel Audio Mixer > Config > Source Audio Channel Select the audio channels to be assigned to a fader.
  1. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
  2. Click the Value button and select the channels you want to assign to the fader.
Source Audio Input Audio Mixer > Config > Source Audio Input Select the audio source to be assigned to a fader.
  1. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
  2. Click the Value button and select the audio source you want assigned to the fader.
Test Tone Frequency Audio Mixer > Config > Test Tone Frequency Select the test tone frequency for the selected audio channel.
  1. Click the InnerAudioMixerChannel button and select the channel you want to send the command to.
  2. Click the Frequency (Hz) button and select the audio frequency you want to use for the test tone.